PVA BI2000 Owner's Manual

Revision F / February 2020 Page 2 of 37 This document is based on information available at the time of its publication. While efforts have been made to ensure the contents of this manual are accurate, the information contained herein does not purport to cover all specific details or variations in hardware, or to provide for ever ...

Revision F / February 2020 Page 3 of 37 Table of Contents Introduction ........................................................................................................... 6 PVA Contact Information ........................................................................................................ 6 Document History .. ...

Revision F / February 2020 Page 4 of 37 Auto Cycle ................................................................................................................................ 16 Manual Mode ............................................................................................................................ 16 Conveyor ...

Revision F / February 2020 Page 5 of 37 Rotary Adjustment ................................................................................................................ 30 Rotation Angle ................................................................................................................ 30 Soft Start Adjustment .... ...

Revision F / February 2020 Page 6 of 37 Introduction Before you operate this system, read the operation and setup manual. This will help you to become familiar with the product and ensure successful operation. If any questions or problems arise, contact PVA’s Technical Support department. PVA Contact Information Main Office PV ...

Revision F / February 2020 Page 7 of 37 Safety Certain warning symbols are affixed to the machine and correspond to notations in this manual. Before operating the system, identify these warning labels and read the notices described below. Not all labels may be used on any specific system. Always wear approved safety glasses when ...

Revision F / February 2020 Page 8 of 37 Do not smoke near the PVA UV cure machine. Always have a fire extinguisher available for emergency use. Before performing any repairs or maintenance to the system, turn off power and lock out the power disconnect switch. Warning notices are used to emphasize that hazardous voltages, current ...

Revision F / February 2020 Page 9 of 37 Notices and Warnings • Wear safety glasses, gloves, and long-sleeved clothing when working with automated industrial equipment. • Read and understand all operating manuals before using this equipment. • Do not disable the safety features of the machine. • Lock-out and tag-out the a ...

Revision F / February 2020 Page 10 of 37 Temperature and Humidity Operation and storage should be done at 40–105°F (4–41°C) and low humidity. Do not let condensation collect on the machine. Install the system on a level surface, away from standing water, possible over spray, and overhead leaks. Description of Components T ...