MUNBYN ITPP941 Getting Started

Mac Driver ................................................................................................................................. 2 Windows Driver .................................................................. ...

1. Please download the driver package for ITPP941 from this link: https://munbyn.biz/941macd *Tips: If there is a error the .pkg file can’t be opened because it is from undentified developer when installing the driver, please follow the steps below to allow the macOS to finish the instal ...

recommended that you open the installation guide so you can follow along. Please double click on the pkg installer to begin. 3. Follow the installation steps until you receive "Installation was successful" message shown below. ...

5. On the next window, press "+" ...

7. Please search / find "Munbyn Label Printer" and click OK. 8. Click on "Add" You may wish to print a Sample 4 x 6 Shipping Label. In the print dialogue, please be sure to select ...

Windows Driver 1. Please download the Windows Driver for ITPP941 at link below: https://munbyn.biz/941wind 2. After the download is complete, directly double-click to open, Please make sure the printer is turned on and connected via USB and windows. 3. Af ...

it? A:There are two reasons: 1. The main reason is that the size of your shipping label file is not 4x6 inches. At this time, you need to set the correct label size. This needs to be set on the shipping platform or online store, depending on your fil ...

In the presets settings, you can permanently save the settings for this printing to avoid repeated settings. 2. Q:Why I printed blank labels? A: (1) The most common reason is that the labels were loaded upside down. Please ensure your labels are properly loaded, the tearable side up. (2) Ensure your labels ar ...

ITPP941' -> Manager -> Printing Preferences -> Page Setup -> Dotted line->Apply. If the problem is still not solved, please follow point 6 and reduce the density to 2 and the speed to 4. (2)For Mac: Access these settings directly from the print menu as shown ...