MULTILANE ML4041-K Technical Reference

described below: 1. Connect a jumper on (P15) situated close to the microcontroller. 2. Connect a USB cable between the PC and Board. 3. Power up the board with a +3.3V supply. 4. LEDs (D2, D4) start blinking. 5. Remove jumper. 6. Ope ...

MULTILANE ML4041-K 3.4.1 External I2C The I2C bus can be accessed externally using U156 pins. In this case a jumper should be placed on pin header P16 (HW_I2C) shown in the image below. Figure 2: External I2C 3.4.2 External HW Control Also Low Speed Signals are controllable using an external source, this can be done through control signal ...

MULTILANE ML4041-K 1. Introduction ....................................................................................................................... 3 2. Key Features ...................................................................................................................... 3 3. ML4041-K Hardware ............................. ...

MULTILANE ML4041-K compliant and provides a user-friendly interface to operate the board and access all its features. The communication between the ML4041-K board and the software is established through USB connection. 4.1 USB Driver In order to be ...

MULTILANE ML4041-K Houmal Technology Park 14F-5/ Rm.5, 14F., No 295 Fremont, CA 94539 Askarieh Main Road Sec.2, Guangfu Rd. East Dist., USA Houmal, Lebanon Hsinchu City 300, Taiwan (R.O.C) +1 51 ...

100G QSFP transceivers and active optical cables. It includes a complete user-friendly GUI supporting all features defined by QSFP MSA and simplifying configuration processes to enable intuitive memory map programming and testing. It i ...

MULTILANE ML4041-K According to the powering method described in section 3.1, the input voltage supply must follow the table below. Parameter Symbol Condition Min Typical Max Unit +5 P5V Supply from J43 (P5V pin) - 5 - V +3.3 P3V3 Supply from J43 (P3V3 Pin) OR banana plug U6 3.0 3.3 3.6 Table 1: Voltage Operating Conditions 3.3 LED Ind ...