Panasonic PT-EZ770Z Service Manual

copying and distribution is a violation of law. LCD Projector ORDER NO. VED1311485CE D10 Rev.-11 (2017-10) ...

WARNING This service information is designed for experienced repair technicians only and is not designed for use by the general public. It dose not contain warnings or cautions to advise non-technical individ ...

1. Safety Precautions 2.�Specifications SECTION 1 SERVICE INFORMATION 1. The name of each part 2. Menu Navigation 3. Service Mode 4. External Controls 5. Notes on service 6. Troubleshooting SECTION 2 DISASSEMBLY PROCEDURES 1. Parts Locations 2. Mechanical and Electrical Parts Disassembly 3. Optical Parts Disassembly

1.1. General Guidelines � -�For�continued�safety,�no�modification�of�any�circuit�must�be�attempted. - Unplug the power cord from the power outlet before disassembling this projector. - Use correctly the supplied power cord and must ground it. - It is advisable to use an isolation transformer in the A ...

ENGLISH - 151 Specifications The specifications of the projector are as follows. Power supply AC 100 V - 240 V, 50 Hz/60 Hz Power consumption PT-EZ770Z 590 W (6.7 A - 2.5 A) PT-EW730Z, PT-EX800Z 575 W (6.5 A - 2.4 A) 0.3 W when [STANDBY MODE] is set to [ECO] 10 W when [STANDBY MODE] is set t ...

152 - ENGLISH Operating environment Operating environment temperature*1 0 °C (32 °F) - 45 °C (113 °F) Operating environment humidity 10 % - 80 % (No condensation) Remote control Power supply DC 3 V (AAA/R03/LR03 battery x 2) Operating range Within approx. 30 m (98'5") (when operated directly in front of s ...

ENGLISH - 153 r Terminal terminal 1 set, high-density D-Sub 15 p (female) RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω) SYNC/HD TTL high impedance, automatic positive/negative polarity compatible VD TTL high impedance, automatic positive/negative polarity compatible YPBPR signal Y ...

PT-EW730Z / PT-EW730ZL PT-EX800Z /EX800ZL SECTION 1 SERVICE INFORMATION (2014-04) 1. The name of each part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-2 1.1 Projector body 1.2 Control panel 1.3 Connecting terminals 1.4�Remote�controls 2. ...

1. The name of each part 1.1 Projector body ENGLISH - 27 f When operating the remote control by directly pointing the remote control signal receiver of the projector, operate the remote control at a distance approx. 30 m (98'5") or shorter from the remote control signal receiver. The remote control can control at angles of ...