Omron Microscan MS-3 Troubleshooting Manual

P/N 83-220119 Rev A MS-3 Troubleshooting Guide Symptom Cause Solution Motor won't spin up and scan. Power supply is lower than required voltage. Use a shorter cable or provide required input voltage. Default pin held low at Power-up. Boot mode enabled. Bad cable. Fix or replace cable. Missing or faulty Applic ...

MS-3 LED Indicators LEDs Normal Read Modes Normal Read Modes Normal Read Modes Read Test Mode Read Test Mode Read Test Mode Read Test Mode Read Test Mode Read Test Mode Control Mode Control Mode Control Mode Boot Mode 100% OFF OFF ON OFF OFF OFF OFF OFF ON ON ON BLINK ON OFF 80% OFF ON OFF OFF OFF OFF OFF ON ...