Makita JR3051T Instruction Manual

DOUBLE INSULATION Read before use. ...

30 mm Strokes per minute 0 - 3,000 min -1 Max. cutting capacities Pipe (with 300 mm blade) 130 mm Wood (with 300 mm blade) 255 mm Overall length 447 mm Net weight 3.2 - 3.3 kg Safety class /II • Due to our continuing program of research and development, the specifications herein are subject to change ...

For European countries only The EC declaration of conformity is included as Annex A to this instruction manual. SAFETY WARNINGS General power tool safety warnings WARNING: Read all safety warnings, instruc- tions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed b ...

1. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. 2. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must ...

switched off and unplugged before adjusting or checking function on the tool. Switch action WARNING: Before plugging in the tool, always check to see that the switch trigger actu- ates properly and returns to the "OFF" position when released. WARNING: Switch can be locked in "ON" posit ...

figure. 3. Secure the hook with the screws. 1 2 3 ► 1. Square nut 2. Hook 3. Screw ASSEMBLY CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Installing or removing the recipro saw blade CAUTION: Always clean out all chips or for ...

one hand on insulation cover and the other on the switch handle. CAUTION: Always press the shoe firmly against the workpiece during operation. If the shoe is removed or held away from the workpiece during operation, strong vibration and/or twisting will be produced, causing the blade to snap dange ...

Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium 885752-228 EN 20190911 ...