Veracity VIEWSPAN Solo Quick Start Manual

V1.7 | 2022 | V I D E O D I S P L AY C O N T R O L L E R Quickstart GUIDE Thank you for purchasing this video display appliance. The aim of this document is to quickly guide you through the process of initial installation and setup of the unit. For detailed instructions, pl ...

V1.7 | 2022 | Safety CAUTION: The unit will be powered on upon connecting a valid power supply source. Please make sure to properly shut down the device’s operating system prior to removing power. 1. The openings on the enclosure are for air convection to protect the equipm ...

V1.7 | 2022 | Hardware What’s included in the box | | Appliance | DC Power Supply with Country Specific Cable | VESA Mounting Bracket and Screws | Quickstart Guide Note: When unpacking, inspect the shipment box and appliance to identify any possible damage due to shippi ...

V1.7 | 2022 | Port Guide VGA (Blue) HDMI Ethernet/LAN USB 3.0 (Blue) USB 2.0 (Black or Yellow) Mic Input (Pink) Audio Output (Green) DC Input ...

V1.7 | 2022 | Installation PHYSICAL The VIEWSPAN Solo ® is a stand alone module with a separate power supply. The appliance can be desktop mounted, wall mounted, mounted on a monitor or installed on a rack shelf. A VESA mounting bracket is included. Contact your supplier for ...

V1.7 | 2022 | Setup When installing the equipment, please make sure that cables are installed ensuring they do not create a trip hazard. Cables connected to the equipment must not be subject to any mechanical strain. IMPORTANT: Static IP Address Networks When connecting to a ...

V1.7 | 2022 | | Restart System | Try a Shorter Cable IMPORTANT: It is highly recommended to disable any “Power-saving” features on your monitors using the monitor settings menu. Step 3 | Connect Power and Boot Appliance Connect the DC power connector on the appliance ...

V1.7 | 2022 | The operating platform Language and Keyboard layout is set to English (US) by default. To change this, use the Windows ‘Run’ command and type “Region”. Follow the instructions presented. The device uses DHCP by default, if your network supports DHCP, the ...

V1.7 | 2022 | The browser will load the AWP login page when login is enabled. If disabled, user login can be enabled on the ‘Settings->Global Settings’ page. Default AWP login credentials. Username: video Password: p@ssw0rd The ‘Users’ link in the top right-hand si ...