Veracity VIEWSPAN 6 Quick Start Manual

V1.5 | 2021 | V I D E O W A L L C O N T R O L L E R Quickstart GUIDE Thank you for purchasing this video wall appliance. The aim of this document is to quickly guide you through the process of initial installation and setup of the unit. For detailed instructions, pleas ...

V1.5 | 2021 | Safety CAUTION: The unit will be powered on upon connecting a valid power supply source. Please make sure to properly shut-down the device’s operating system prior to removing power. 1. WARNING : VIEWSPAN 6 and VIEWSPAN 6 Plus MUST BE EARTHED. The applian ...

V1.5 | 2021 | 8. The unit is always recommended to be installed in a rack cabinet, with a supporting rack shelf below if possible. The unit should be secured to the cabinet using all four mounting points in the rackmount ears. 9. Please see the User Manual for further in ...

V1.5 | 2021 | Port Guide HDMI DisplayPort Ethernet/LAN USB 3.0 (Blue) USB 2.0 (Black or Yellow) AC Input (C13) ...

V1.5 | 2021 | Installation PHYSICAL The VIEWSPAN 6 ® and VIEWSPAN 6 Plus ® are both 2U rack-mountable systems. The appliance can either be desktop mounted or installed in a standard 19” rack enclosure. Use the enclosure mounting tabs to secure the unit within the rac ...

V1.5 | 2021 | CABLE LENGTHS Workable cable lengths depend on the quality of the cables used as part of your video wall installation. Cable Type Resolution Maximum Length DisplayPort (output) Up to 1080p60 15m - 20m (49ft - 66ft) DisplayPort (output) Up to 4k60 10m (33 ...

V1.5 | 2021 | Setup When installing the equipment, please make sure that cables are installed ensuring they do not create a trip hazard. Cables connected to the equipment must not be subject to any mechanical strain. Step 1 | Connect Network Connect the Ethernet cable ...

V1.5 | 2021 | Step 3 | Connect Power and Boot Appliance Connect C13 power cable to AC input connector on the appliance and the mains socket. Power on the unit by pressing the power button, the LED will illuminate to show the appliance is powered. Step 4 | Main Scr ...

V1.5 | 2021 | The device uses DHCP by default, if your network supports DHCP, the appliance will now be discoverable on the network. The VIEWSPAN ® Hostname will be the VIEWSPAN ® “Serial Number” You can now login to the Appliance Web Portal (AWP) to configure the ...