Electrolux Diva Service Manual

SERVICE MANUAL DISHWASHERS © ELECTROLUX HOME PRODUCTS ITALY S.p.A. Spares Operations Italy Corso Lino Zanussi, 30 Publication no. I - 33080 PORCIA /PN (ITALY) 599 35 90-23 Fax +39 0434 394096 Edition: 2006-02 EN Dishwasher with EDW1100 electronic control system (Functionalities) “DIVA” Production: ZM - Solaro (I ...

CONTENTS 1 Purpose of this manual....................................................................................................................... 5 2 PRECAUTIONS.................................................................................................................................. 5 3 GENERAL CHARACTERISTICS...... ...

9.1 Table of alarms ..................................................................................................................................25 10 Diagnostics mode / Options.............................................................................................................. 27 10.1 Accessing diagnostics mode .... ...

1 Purpose of this manual The purpose of this Service Manual is to provide Service Engineers, who already have the basic knowledge necessary to repair household dishwashers, with technical information regarding dishwashers featuring the EDW1100 electronic control system. These appliances are manufactured at Solaro (Italy). The EDW1 ...

4 AESTHETIC CHARACTERISTICS: Control panel with the maximum configuration: - VERTICAL Version Control panel with the maximum configuration: - HORIZONTAL Version Control panel with the maximum configuration with display: - VERTICAL Version Control panel with the maximum configuration with display: - HORIZONTAL Version ...

4.1 CONTROL PANEL 4.1.1 Control panel The configuration of the control panel depends on the following: ƒ Number of programme selection buttons (from a minimum of 3 to a maximum of 6) ƒ Number of LEDs or presence of the one-digit display [S0] - ON/OFF button [S1] … Ö [S3] - PROGRAMME SELECTION buttons [S4] … Ö [S6] – PR ...

4.1.5 Indicator LEDs The indicator LEDs provide the user with the following information: ƒ End of cycle: this LED is featured on all models. ƒ Salt: indicates that the salt reservoir is empty. If the level of regeneration is set to “1” (no regeneration), this LED remains unlit at all times. ƒ Rinse-aid: indicates that the r ...

4.2.5 Delayed start To select the delayed-start time: 1. Press button S0 to switch on the appliance. 2. Press a button to select the desired programme: the corresponding LED lights: for ex. S2, the relative LED lights up. 3. Press the button repeatedly to select the delayed-start time: • Version with LED: o The Led LD8 lights to ...

4.3 Cancelling a programme 4.3.1 Reset To cancel a programme that has already started: 1. Open the door carefully and press buttons S2 - S3 together for approximately 2 seconds. 2. The salt and rinse-aid LEDs light: the programme is cancelled and the appliance is in pre-selection mode. 3. Set the new cycle. 4.3.2 Interruption of ...