Electrolux ELITE 3325 Instruction Manual

A EC Declaration of Conformity DE CE Konformitätserklärung NO EF Erklæring om Overensstemmelse FR Déclaration de conformité Européenne @ ∆ήλωση Συµµρ ωσης πρς τις Eντλές της EE HU Technikai leírások IT Dichiarazione di Conformità CE PT Declaração de Conformidade ES Declaracion de ...

CORRECT GUARD NEEDED, WITH DIFFERENT CUTTING ATTACHMENTS DE ÜBERSICHTSTABELLE ZUR AUSWAHL DES RICHTIGEN SCHUTZBLECHES FÜR DIE EINZELNEN SCHNEIDWERKZEUGE FR TABLEAU RECAPITULATIF POUR LE CORRECT ACCOUPLEMENT LAME OU TETE FIL NYLON / DEFENSE DE ...

Do not smoke while re- fuelling or while operat- ing the trimmer Do not use metal blades Wear safety clothing: Approved safety glasses or face shield Wear safety clothing: Approved ear defender Wear safety clothing: Approved safety helmet Wear safety clothing: Approved gloves Wear safety clothing: Approved safety footwear MAX. 0000 Min-1 If not u ...

B. Safety precautions Blade thrust Beware of projected objects Maximum safety distance Choke fully opened (hot start / run) Choke closed (cold start) 1) Make sure all operators study this manual carefully before using the trimmer; only use this machine for usage specifically mentioned in this manual. Never allow children to use the trimmer. 2) Wh ...

C . Safety usage WARNING: do not start engine if it is not attached to the shaft as the clutch might disintegrate. For units equipped with a clutch, be sure the cutting attach- ment stops turning when the engine idles. This product must be held to the right of the operator’s body. This will ensure exhaust fumes are directed away from the operat ...

D. Fuel mix F. Blade and nylon string head assembly E. Safety guard assembly NON-ORIGINAL ACCESSORIES AND SPARE PARTS INCREASES THE RISK OF ACCIDENTS AND IN SUCH A CASE THE COMPANY IS NOT LIABLE FOR DAMAGE TO PEOPLE AND/OR THINGS. 1) In the interest of safety, it is imperative that the unit is used with the correct guard (P/N 248959 Ø25 P/N 2489 ...

should carefully read the sections SAFETY, SAFETY USAGE and SYMBOL MEANINGS. STARTING A COLD ENGINE 1) Position the on/off switch to the I (ON) position, away from the «STOP» position. 2) Rotate the choke lever in the direction illustrated by the arrows. This engages the fast idle system. 3) Squeeze the prim ...

To adjust the idle speed, however, proceed as fol- lows: With engine running and warm, slowly turn screw ‘T’ clockwise until the engine runs smoothly with a consistent noise level but without making the cutting head rotate. If the cutting attachment does move or the engine runs too fast, slowly turn screw ‘T’ in an anti- clockwise directi ...

N. Replacing nylon line 1) Loosen the locking nut on the base of the nylon head by turning it clockwise. 2) Remove the base cover assembly. Remove the empty spool from the housing and discard any remaining line. REWINDING NEW LINE 3) Prepare 2 lengths (8ft each) of 2.4 mm nylon line. Thread 1 end of each line into the two holes on opposite sides ...

Engine will Engine runs badly The machine not start or looses power runs but does when cutting not cut well • • • • • • • • • • Engine still gives trouble: contact your dealer. Check STOP switch is in the posi- tion I. Control fuel level min. 25%tank capacity. Check air filter is clean. Remove spark plug, dry it, clean ...