Electrolux Trimmer Instruction Manual

Electrolux Outdoor Products Via Como 72 23868 Valmadrera (Lecco) ITALIA Phone +39 0341 203111 - Fax +39 0341 581671 Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice. Electrolux Outdoor Products manufacture products for a number ...

Partner oil 1 ltr 25 cm 3 4 100 5 125 10 250 20 500 40:1 2,5% McCulloch oil 12 11 11 11 5 10 1 2 ...

GUARD NEEDED, WITH DIFFERENT CUTTING ATTACHMENTS ÜBERSICHTSTABELLE ZUR AUSWAHL DES RICHTI- GEN SCHUTZBLECHES FÜR DIE EINZELNEN SCHNEIDWERKZEUGE TABLEAU RECAPITULATIF POUR LE CORRECT ACCOUPLEMENT LAME OU TETE FIL NYLON / DEFENSE DE SECURITE OVERZICHTSTABEL OM TE BEPALEN W ...

Warning Safety apparel: Approved protective goggles or visor, approved hard hat and hearing protection. Read the instructions for the user carefully and make sure you under- stand how all the controls work. Safety apparel: Approved gloves. Safety apparel: Approved boots. Do not smoke when refueling or using the machine. Danger of flying debris. E ...

Use of the manual • Anyone who uses the machine should have read the entire manual with extreme care. • All users should be familiar with the operations for use of the machine under absolutely safe conditions as described in this manual, and should be instructed in the proper cutting techniques to use, possibly by practical demonstration. • ...

plete, defective or has been altered by anyone other than an Authorized Service Center. The risk of accidents increases considerably if maintenance is not carried our regularly in a professional way. In case of doubt contact an authorized service center. All operations of maintenance, assembly, disassem- bly and fueling should be done with the ma ...

pressed with adhesive tape, string or other. This device serves to prevent accidentally press- ing the throttle trigger (fig. A no. 3). In fact, the trigger (fig. A no. 3), can only be pressed if the safety lever is pressed at the same time (fig. A no. 17). By means of 2 separate springs, upon releasin ...

able to release the machine quickly. The harness is equipped with a fasten-release mechanism. The harness enables the operator to support the machine during use (see “Safety pre- cautions”, B7). ENGLISH - 5 Preparation of the mixture Do not use any other type of fuel than the type recommended in this manual. This ...

you tighten, hold the nylon string head and plate still and insert the wrench or screwdriver supplied in the holes in the plate and gearbox; first turn the plate until the two holes match. E5. Assembly/disassembly of grass cutter blade Assemble blade as illustrated: a) Flange guard - b) Upper cap with blade centering - c) Blade with text and dire ...

G. Carburetor adjustment Your machine can be equipped with a low emis- sion carburetor. We recommend that you have any adjustment of the carburetor made exclusive- ly by an authorized service center, which disposes of special equipment for ensuring the best per- formance with the lowest emissions. To adjust the speed to the minimum, turn the scre ...