Extech Instruments MP510 Operation & User’s Manual

Tech support: Ext. 200; Email: [email protected] Repair/Returns: Ext. 210; Email: [email protected] Website: www.extech.com WARRANTY EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for three years from date of shipment (a six month limited warranty applies on sensors and ...

MP530 digital multimeter. Properly used, this meter will provide many years of reliable service. MultiPro™ Meters measure AC/DC Voltage, AC/DC Current, Resistance, Frequency, Capacitance, Diode, and Continuity. The MultiPro™ also offers RS-232 PC Interface data acquisition c ...

long periods. 9. To avoid electric shock, do not measure AC current on any circuit whose voltage exceeds 500V AC. 10. Voltage checks on electrical outlets can be difficult and misleading because of the uncertainty of connection to the electrical contacts. Other means should be used to en ...

500.0 mV 0.06% + 2d 5.000V, 50.00V, 500.0V, 1000V 0.08% + 2d NMRR: >60dB @ 50/60Hz, CMRR: >120dB @ DC, 50/60Hz, Rs=1kΩ Input impedance: 10MΩ, 16pF nominal (44pF nominal for 50mV & 500mV ranges) AC VOLTAGE *Specified from 30% to 100% of range CMRR: >60dB @ DC to 60Hz, Rs=1kΩ Input Impedance: ...

500.0µA, 5000µA 0.6%+3d 0.15mV/µA 50.00mA, 500.0mA 0.6%+3d 3.3mV/mA 5.000A, 10.00A* 0.6%+3d 0.03V/A 40Hz to 1kHz 500.0µA, 5000µA 0.8%+4d 0.15mV/µA 50.00mA 0.8%+4d 3.3mV/mA 500.0mA 1.0%+4d 3.3mV/mA 5.000A, 10.00A* 0.8%+4d 0.03V/A *10A continuous, 20A for 30-second max with 5 minutes cool down interval ...

5V 2V 10Hz - 125kHz 50V 20V 10Hz - 20kHz 500V 80V 10Hz - 1kHz 1000V 300V 10Hz - 1kHz Ω, Cx, diode 300mV 10Hz - 125kHz µA, mA, A 10% F.S. 10Hz - 125kHz Accuracy: 0.01% + 2d Audible Continuity: Measurement threshold: Beeper will sound if measurement is below 20Ω. Beeper will not sound ...

Auto Power Off: After 17 minutes of inactivity with no input signal Safety: The MultiPro™ Series meters are intended for indoor use and protected, against the users, by double insulation per EN61010-1 and IEC61010-1 2nd Edition (2001) to CAT III 1000V & CAT IV 600V. The meter (all versions) also meets UL3111-1(1994 ...

1. 5000 count Liquid Crystal display 2. Function push-buttons 3. Rotary function switch 4. 10A input jack 5. V/Hz/Ω/Cap/Temp input jack 6. COM input jack 7. mA/uA current input jack NOTE: RS-232 Optical interface is located on the top rear of the meter. Features Analog Bargraph display Visual indication of measurement in t ...

viewing. Manual and Automatic Ranging The MultiPro™ series multimeters are Autoranging, with manual override. Smart Power Auto Power Off Smart Power shuts the meter down automatically after approximately 17 minutes of inactivity. Audible Beeper To disable the audible meter tones, pr ...