Fire-Lite MS-9600 Supplement

Doc. # 51583 Rev. B 05/07/01 ECN 01-131 This Supplement has been created to inform installers about the new Signal Line Circuit (SLC) capacity of 159 detectors and 159 modules per SLC loop; and Introduce two new FACP software features which (1) provide a synchronized strobe programming option, (2) allow the control panel to monitor and pri ...

Doc. # 51583 Rev. B 05/07/01 ECN 01-131 5. Press 1 to display the following: 6. Press down arrow key once to display the following: 7. Press 2 to display the following: 8. Press 1 to program NAC 1 or press 2 to program NAC 2. The following will be displayed (the # symbol will be replaced by 1 or 2): 9. Press 2 to display the following: 10. ...

Doc. # 51583 Rev. B 05/07/01 ECN 01-131 II. Addressable Smoke Detector Sensitivity Software Enhancement The FACP software has been enhanced to include a feature which allows the control panel to monitor the sensitivity of each addressable smoke detector in the system. This eliminates the need for a service person to physically connect a s ...

Doc. # 51583 Rev. B 05/07/01 ECN 01-131 DEVICE# DEVICE TYPE %DRIFT COMP. CHAMBER TIME/DATE 1D001 SMOKE (PHOTO) 20 1478 12:01AM 01-08-2001 1D002 SMOKE (PHOTO) 20 1362 12:01AM 01-08-2001 1D003 SMOKE (PHOTO) 21 1452 12:01AM 01-08-2001 1D004 SMOKE (PHOTO) 20 1350 12:01AM 01-08-2001 1D005 SMOKE (PHOTO) 21 1245 12:01AM 01-08-2001 1D006 SMOKE (PHO ...

Doc. # 51583 Rev. B 05/07/01 ECN 01-131 The following information is provided as a clarification to the 9600 Fire Alarm Control Panel manual. 1. PAS (Positive Alarm Sequence) programming feature. Refer to the 9600 manual page 47 and page 114 for information on this option. The PAS option is not available in the initial release of the 9600 ...