Tunturi T30 Owner's Manual

53-62 BRUKSANVISNING 63-71 KÄYTTÖOHJE 72-80 www.tunturi.com • SERIAL NUMBER • SERIENNUMMER • NUMERO DE SERIE • SERIENUMMER • NUMERO DI SERIE • NÚMERO DE SERIE • SERIENNUMMER • SARJANUMERO T30_08_LOCKED.indd 1 16.5. ...

Contents ASSEMBLY..................................................................3 CONSOLE....................................................................4 BASICS ON EXERCISING...........................................6 OPERATION.................................................................6 MAINTENANCE..... ...

Lift up the upright, then place the screws (A) and washers (B, C) inside holes at the bottom of the upright. Use the screwdriver (F) to tighten them well. Put the console to the correct position. Use the allen key (E) to tighten the screws (A) and washers (B) inside holes at the top of the upright. Attach side cap ...

POWER CORD AND GROUNDING INSTRUCTIONS Plug the socket end of the power cord into the treadmill at the left front corner. Before connecting the device to a power source, make sure that local voltage matches that indicated on the type plate. The treadmill operates at 110 V or 230 V. This treadmill must be grounded. If i ...

LED Indicators & Displays and Operating Ranges The default values are PROGRAM = Manual (M), TIME = 00:00 (counting up), SPEED = 0,8 KMH / 0,5 MPH, DISTANCE = 0.00 (counting up), KCAL = 0 (counting up), HEART RATE = 0, and ELEVATION = 0. A. 2 LED Indicators: The HEART RATE Indicator is on and the HEART RATE /ELEVAT ...

120 cm or 4 feet of clearance behind the treadmill and 60 cm or 2 feet on either side and in front of the treadmill. • We recommend that the equipment is placed on a protective base. ABOUT USING THE EQUIPMENT • Always unplug the treadmill from the electrical outlet after each training session. • Only one person ...

HRC COMBINATION = heart rate control is based on automatically, simultaneously changing treadmill elevation and belt speed. By rotating the dial clockwise, you can increase setting values and scroll the programs in an order of the programs. Pressing the dial is [ENTER]. By pressing the dial, you can accept the sel ...

track before the measurement. TRAINING WITH PSC 1. Select Manual exercise, Rolling Hills profile, a condition test or the standard heart rate exercise with automatic elevation adjustment. In these exercises you can adjust the track speed with PSC. The PSC signal light indicates that the feature is in operation. The de ...

is allowed run across to one side for long periods of time the edges of the belt may be damaged and the treadmill may not continue to operate correctly. Any damage to the belt caused by the lack of necessary adjustment will not be covered by the warranty. ADJUSTING THE BELT TENSION The belt must be tensioned if it ...

MOVING AND STORAGE After assembly is complete, you may fold the machine into the upright position for storage. To hold the machine, raise the desk until it locks in to position. NOTE! Make sure you hear the click sound of the deck locking into position. This is to ensure the deck is locked in place and will not drop ...