Sharp GX-M10H(OR) Operation Manual

carefully. It will guide you in operating your SHARP product. Special Note Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast syst ...

power lead from the wall socket. Plug the AC power lead back in, and then turn on your system. ●In case of an electrical storm, unplug the unit for safety. ●Hold the AC power plug by the head when removing it from the wall socket, as pulling the lead can damage internal w ...

Page 1. CD Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2. USB Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5. iPod Indicato ...

plug the AC power lead of this unit into the wall socket. Notes: ●Remove all batteries when using AC power. ●Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. Caution: ●During battery/DC operation, the unit will be ...

by connecting the system to TV/monitor. If the TV/monitor has a video input, connect it to the VIDEO OUT socket at the back of the unit and set the TV Out on the iPod or iPhone unit to “ON” position. Note: Please make sure to set iPod unit to either NTSC or PAL to match your TV signal. Please visit ...

The display and subwoofer light can be changed. Main unit: 1) Press DEMO/(DIMMER)/ button for more than 3 seconds. The current mode will be displayed. 2) Within 5 seconds, press DEMO/(DIMMER)/ button to change the mode. Remote control: Press DEMO/DIMMER button to change the mode. Notes: ● ...

only) (continued) To confirm the time display: Press the CLOCK/TIMER button. The time display will appear for about 5 seconds. Notes: ●When power supply is restored after unit is plugged in again or after a power failure, confirm the clock, if required, reset the clock (pages 6 - 7). ●The clock will continue counting for ...

1 Press the ON/STAND-BY button to turn the power on. 2 Press the USB / button on the remote control or the main unit to select USB function. 3 Connect iPod, iPhone or iPad to the unit. “USB/iPod” will appear. 4 Press the USB / button to start playback. Note: Stop button ( ) is invalid during iPod, iPho ...

(continued) Note: When navigating the iPod, iPhone or iPad menu with remote control, do not operate any of the buttons on the iPod or iPhone unit. The volume level is adjusted by pressing the VOL (+ or –) button on the main unit or the remote control. Adjusting the volume on the iPod, iPhone or iPad units give no effec ...

(continued) Caution: ●Do not place two discs in the spindle. ●Do not play discs of special shapes (heart, octagon, etc). It may cause malfunctions. ●If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. ●Due to the structure of the disc information, it takes longer to read a ...