Redring Professional SB Installation & Operating Instructions Manual

Applied Energy Products Limited, Morley Way, Peterborough, PE2 9JJ, UK Telephone: +44 (0) 844 372 7761 / Fax: +44 (0) 84 372 7762 Website: www.applied-energy.com Technical Advisory Service Hotline: +44 (0) 844 372 7766 THE BOILING WATER DISPENSER INSTALLATION & OPERATING INSTRUCTIONS IMPORTANT: This booklet should be left ...

What the installer will need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Where to locate the unit . . . . . . . . . . . . . . . . . . . ...

If the unit is not working satisfactorily, make the following checks before calling out the contractor. Any one of these adjustments could restore the performance. WARNING: SWITCH OFF THE ELECTRICITY AT THE ISOLATING SWITCH BEFORE REMOVING THE COVER TO MAKE CHECKS SYMPTOM POSSIBLE CAUSE ACTION No water from tap Water so ...

• We recommend that the unit is installed on a suitable wall, at shoulder height and over a sink. • Adjacent to the means for disconnecting the fixed wiring in all poles in accordance with the wiring rules (ie: 13A fused double pole isolating switch). • Available mains cold water supply and drainage facility. • DO NOT insta ...

• Make sure the water is turned on prior to mains electricity supply. • Check all connections for water leaks. • Turn on the power and wait approximately 20 minutes before using. Priming the unit When the power is turned on for the first time the unit will automatically prime itself, covering the ...

• Suitable screws and washers must be used through the designated keyholes on the backplate of the unit ensuring the unit securely fastened to the wall. • Ensure the fixing screws are horizontal and the unit, when installed, is level. Connecting the water supply and vent pipes • When the unit is fixed t ...