Ryobi RPW130HS Operator's Manual

operator’s manual before using this product. Thank you for your purchase. RPW120HS/RPW130HS HydroSurge™ Electric Pressure Washer OPERATOR'S MANUAL RPW120HS manual.indd A1 RPW120HS manual.indd A1 09-9-16 11:23 09-9-16 11:23 ...

of vehicles, boats, buildings, etc, by the removal of stubborn dirt using clean water and chemical detergents. . For domestic use only, not for professional use, and only for operation at temperatures above 0° C . INTRODUCTION This product has many features fo ...

connections dry and off the ground. Do not touch plug with wet hands. ■ To reduce the risk of injury, High pressure cleaners shall not be used by children or untrained personnel. keep children and visitors away. All visitors should wear safety glasses and be kept a safe ...

interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Indicates a potential personal injury hazard. V Volts Voltage A Amperes ...

SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, ...

2. Nozzle storage 3. Gun/Lance 4. Detergent tank 5. HydroSurge(TM) / detergent lever 6. High pressure trigger lock-out 7. High pressure trigger 8. Hose 9. Telescopic handle 10. Power cord storage Figure 3 11. Hitch pin 12. Wheel 13. Axle Figure 4 14. Handle assembly 15. Button 16. Collar ...

operating features and safety rules. DETERGENT TANK Remove the cap from the detergent tank to add detergent to the pressure washer. HIGH PRESSURE TRIGGER Depressing this trigger allows you to dispense water at high pressure. HIGH PRESSURE TRIGGER LOCK-OUT The trigger lo ...

the gun. ■ Grasp the plastic fitting and slide onto the spout until it clicks into place. ■ To remove, depress the latch on top of the fitting and remove the hose from the spout. ■ The high pressure hose has a metal connection and slides into the opening at the top ...

Move the low pressure (high flow) lever on top of the trigger handle forward. This will provide a spray of water at low pressure. NOTE: When using low pressure (high flow) rinsing only, engage the high pressure trigger lock-out to prevent accidental depressing of the high pressure trigger. � ...

and hold the handle release button while pulling up on the handle to restore it to normal operating position. NOTE: The use of a pump protector is recommended to prevent cold weather damage during storage over the winter months. MAINTENANCE WARNING: When servicing, use onl ...