Socket SOMO 655 Release Notes And Installation Manual

Copyright Notice Copyright © 2012-2013 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, SoMo, SocketCare, SocketScan, Connect!Agent, and Wi-Fi Companion are trademarks or registered trademarks of Socket Mobile, Inc. Bluetooth and the Bluetooth logos are registered trademarks owned by Bluetooth SIG, Inc., U. ...

a. Reduce power usage in deep sleep b. Power switch handling improvements (Suspend/Resume) c. Correct issue to preserve real time clock when battery swapped 2) Enhanced Wi-Fi Companion (e-WFC) Features: a. Added the Roaming and Wi-Fi Region UI's b. Channel 14 is displayed in regions where its use is support ...

a. On-screen pairing for 7Ci/7Di b. Support for 7Di and 7DiRx c. Brightness control link for on screen barcodes d. Additional error detection when opening COM ports 6) Includes the Windows Embedded Handheld 6.5 Adaptation Kit Update (AKU) 6.5.3.12.16 and 6.5.3.12.17 from Microsoft, which resol ...

From the Start screen, tap on Settings | System | System Info. Tap on OS Version to view information. If you need to update your SoMo with the latest Service Pack, follow the instructions for installation below. Service Pack version = SP2 ...

Socket highly recommends that you plug the SoMo 655 into an external power source using the charging cable/cradle. Alternatively, make sure the SoMo battery is adequately charged. STEP 2: Back up Data on the Device If you have any data on the SoMo 655, please back it up to an external location before you run the ...

IMPORTANT: Keep holding the Right programmable application button until the timer reaches 0 seconds! Otherwise the installation will be aborted. ...

8. After the installation reports, “Update completed!” the Socket splash screen will appear for about 30 seconds then disappear. 9. The Windows Embedded Handheld splash screen will appear for about 30 seconds. 10. The Windows Welcome wizard will prompt yo ...

View IP Addresses You can only view IP address data if the SoMo is actively connected to a WLAN network. 12. In the main screen of e-WFC, tap on the device icon. In the pop-up menu, tap IP Addresses. The IP Addresses screen will appear. If your network uses DHCP, the Renew and Release functions will be enabled. Ta ...

tap and hold the stylus on a certificate in the list. In the pop-up menu, tap View. Trace Route 15. In the main screen of e-WFC, tap Menu | Trace Route. 16. Tap Menu | Configure. Enter the appropriate settings and tap OK. 17. Tap Start. Tap S ...