Electrolux ESI 4121 Instruction Book

3 Installation instructions 4 Building-in 4 Levelling 4 Fixing to the adjacent units 4 Water supply connections 4 Water inlet hose with safety valve 4 Water outlet hose connection 5 Electrical connection 5 Description of the appliance 6 The control panel 6 Prior to using for the first tim ...

appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the ...

this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Building-in This dishwasher is designed to be fitted under a kitchen counter or work ...

The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine). 3. To a ...

programme selected, the following functions can also be set with the help of these buttons: - the setting of the water softener, - deactivation/activation of the inflow of rinse aid, - the cancelling of a programme in progress. Programme selection push buttons: the selection of a washing programme occurs ...

1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with dishwasher salt 5. Fill the rinse aid dispenser The water softener The ...

(The dishwasher must be switched off) The dishwasher is factory set at level 5. 1. Press the On/Off push button. The On/Off indicator light illuminates (setting mode). If a programme push button indicator light is on, this means that a washing programme has been set. The programme must be cancelled: press simultaneously the function ...

thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Filling with rinse aid 1. Open the container by pressing t ...

aid G Load cutlery and dishes into the dishwasher. G Fill with dishwasher detergent . G Select a wash programme suitable for the cutlery and dishes. G Start the wash programme. Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the ...