Electrolux T4130 Service Manual

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Generel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Versions. . . . . . . ...

High voltage on the printed circuit board. IMPORTANT SERVICE NOTE! Continuity and resistance measurements suggested by the procedures in this manual require that power to the dryer be disconnected, and that the device whose resistance is being measured be disconnected from all cir ...

Time, temperature, cooling, reversing, etc. The above parameters are changeable by reprogramming the Selecta Control PCB. Selecta Control PCB The PCB Module is located under the top cover on the front of the machine, see the service manual for the specifi c dryer. In order ...

If the software has been upgraded a label has been affi xed. Hardware version The hardware data is printed on a label, see fi g. 1. The label is affi xed on the print board which is facing downward towards the drum. The label is only visible when th ...

P1-P23 are mentioned. The P-numbers are printed on the print board. The usage of the connections appears from the wiring diagrams supplied with the dryer. The positionings of P1-P23 are shown on the following page. High voltage on the printed circuit b ...

P8 P9 View 2 ...