Electrolux EUC22430W Operation & User’s Manual

Share more of our thinking at www.electrolux.com CONTENTS Safety information 2 Control panel 4 First use 6 Daily Use 6 Helpful hints and tips 7 Care and cleaning 7 What to do if… 8 Technical data 10 Installation 10 Environmental concerns 13 Subject to change without notice SAFETY INFORMATION In the interest of your s ...

tion – thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short- circuit, fire and/or electric shock. Warning! Any electrical component (power cord, plug, compressor) must be replaced ...

to radiators or cookers. • Make sure that the mains plug is accessi- ble after the installation of the appliance. • Connect to potable water supply only (If a water connection is foreseen). SERVICE • Any electrical work required to do the servicing of the appliance should be car- ried out by a qualified elect ...

"Temperature regulation". SWITCHING OFF The appliance is shut off by pressing button (A) until a countdown from -3 -2 -1 is com- pleted. TEMPERATURE REGULATION The temperature may be changed by pressing the button (B). The current tem- perature setting flashes and by pressing button (B) again the set temperature is p ...

key (E) within few seconds. You will hear the buzzer and the icon remains lighted. In this condition any possible operation through the keys does not cause any change as long as this function is activated. It is possible to de-activate the function at any time by pressing key (D) until the corre- sponding icon will fla ...

NORMAL OPERATING SOUNDS • You may hear a faint gurgling and a bub- bling sound when the refrigerant is pum- ped through the coils or tubing. This is correct. • When the compressor is on, the refriger- ant is being pumped around and you will hear a whirring sound and a pulsating noise from the compressor. This is cor- rect. • The ...

any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odour. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush. This operat ...

discontinuously, so the stopping of compressor does not mean being no current. That is why you must not touch the electrical parts of the appliance before breaking the circuit. Problem Possible cause Solution The appliance is noisy. The appliance is not supported properly. Check if the appliance stands sta- ble (all feet and ...

There is no voltage in the mains socket. Connect another electrical appli- ance to the mains socket. Check fuse. Contact a qualified electri- cian. The door has been open to long. Close the door. As much as the advice does not lead to result, call the nearest brand-mark service. CLOSING THE DOOR 1. ...