Electrolux HT020 Instruction Manual

Electrolux Outdoor Products Via Como 72 23868 Valmadrera (Lecco) ITALIA Phone +39 0341 203111 - Fax +39 0341 581671 Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice. Electrolux Outdoor Products manufacture products for a number ...

totally sintetyc oil Partner oil 1 ltr 25 cm 3 4 100 5 125 10 250 20 500 40:1 2,5% McCulloch oil ...

Safety apparel: Approved protective goggles or visor, approved hard hat and hearing protection Safety apparel: Approved gloves CAUTION! • Use the hedge trimmer properly in order to avoid injuries. • Follow the instructions and precautions for reasonably safe, efficient use of the product. • It is the responsibility of the user to follow the ...

• This section describes the safety devices installed on the machine, the controls and maintenance to perform to keep them in perfect working order. • The general description section will help you to identify the parts described in this section. • The risk of accidents is greatly increased if maintenance is not performed regularly or is not ...

C. SAFETY INSTRUCTIONS General precautions • Use the product only for the purpose for which it was designed. • Do not use this machine for any other purpose than trimming or edging shrubs, hedges or bushes. • Always grip the machine firmly with both hands. • Make sure you know how to stop the engine and blades if necessary (see section on ...

• Before starting to cut again make sure your position is correct. • To reduce the fire hazard keep the engine and muffler free of twigs, leaves or excess lubricant. • Watch out for the sharp edges and hot part of the machine. • Prolonged use of the machine or other equip- ment expose the operator to vibrations that can cause the White Fi ...

al in its entirety, with special attention to the safety devices and recommended personal protection equipment. • Before starting the machine make sure it is in perfect conditions and that all the safety devices are correctly installed and in perfect working order. Inspect the blades carefully and do ...

the machine that are not described in this manual. • Contact an authorized service center if you have any questions about the repairs to make. • The warranty may be invalidated in case of improper adjustments made by unautho- rized persons not employed by authorized service centers. • Place the Sto ...

lems and will guarantee the long life and good working order of your machine. REGULARLY: • Important, to avoid overheating the engine, clean off any dust and dirt from the vents on the cylindrical cover and fins on the cylinder using a wooden scraper. PROLONGED DISUSE: Empty the fuel tank and run the engine ...

Technical specifications 25 35 26 0,7 2150 8500 2800 4,5 370 95,6 106 108 8 8 Cylinder displacement (cm3) ................................................................................................................................................ Cylinder bore (mm) .............................................................................. ...