Electrolux EFC 90505 Instruction Manual

CHARACTERISTICS..............................................................................................................................................................6 I ...

ÍNDICE CONSEJOS Y SUGERENCIAS ...........................................................................................................................................13 CARACTERÍSTICAS............................................................................................................................................ ...

ÍNDICE CONSELHOS E SUGESTÕES ............................................................................................................................................21 CARACTERÍSTICAS............................................................................................................................................ ...

INSTALLATION • The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. • The minimum safety distance between the cooker top and the extrac- tor hood is 650 mm. • Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of ...

Blower, Filters 2 1 Telescopic Chimney comprising: 2.1 1 Upper Section 2.2 1 Lower Section 9 1 Reducer Flange ø 150-120 mm 14.1 2 Air Outlet Connection Extension 15 1 Air Outlet Connection Ref. Q.ty Installation Components 7.1 1 Hood Body Fixing Bracket 7.2.1 2 Upp ...

Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • Draw a horizontal line at 650 mm above the hob for installation without the back panel, or at height H (H = height of the visible par ...

• Before hooking up the hood body, adjust the two screws Vr located on the hood body connection points so that they are at the half way point. • Hook the hood body to the mounted bracket. • Adjust the screws Vr to level the hood body. • Tighten the lock screw Vf.   Connections DUCTED VERSION AIR EXHAUST SYSTEM When ...

ing a contact gap of at least 3 mm. • Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan. Flue assembly Upper exhaust flue • Slightly widen ...