Hitachi RAS-30CHP6 Instruction Manual

trouble free use, please read this instruction manual completely.
ULOKF²« VO² ≤∑≠µ≤ ’ Ÿö?Þù« V−¹ VDŽ ÊËbÐ WK¹uÞ …b* “UN'« ‰ULF²Ý« sJ1 wJ Æ«bOł VO²J« «c¼ vKŽ RAC-30CHP6 SPLIT TYPE INDOOR UNIT/OUTDOOR UNIT MODEL RAS-30CHP ...

SAFETY PRECAUTION G Please read the “Safety Precaution” carefully before operating the unit to ensure correct usage of the unit. G Pay special attention to signs of “ Warning” and “ Caution”. The “Warning” section contains matters which, if not observed strictly, may cause death or serious injury. The “Caution” section c ...

ENGLISH PRECAUTIONS DURING OPERATION G Do not attempt to operate the unit with wet hands, this could cause fatal accident. G When operating the unit with burning equipments, regularly ventilate the room to avoid oxygen insufficiency. G Do not direct the cool air coming out from the air-conditioner panel to face household heating apparatus as this m ...

INDOOR UNIT OUTDOOR UNIT WIDTH (mm) 1150 925 MODEL RAS-30CHP6 RAC-30CHP6 HEIGHT (mm) 333 875 DEPTH (mm) 245 315 MODEL NAME AND DIMENSIONS NAMES AND FUNCTIONS OF EACH PART AIR FILTER To prevent dust from coming into the indoor unit. (Refer page 21) FRONT PANEL (AIR INLET). INDOOR UNIT INDICATORS Light indicator showing the operating condition. (Refe ...

ENGLISH Press Temporary Switch Non-conductor Stick INDOOR UNIT INDICATORS TEMPORARY SWITCH Use this switch to start and stop when the remote controller does not work. [Use non-conductor stick (example toothpick)] G By pressing the temporary switch, the operation is done in previously set operation mode. G When the operation is done using the tem ...

NAMES AND FUNCTIONS OF EACH PART REMOTE CONTROLLER This controls the operation of the indoor unit. The range of control is about 7 meters. If indoor lighting is controlled electronically, the range of control may be shorter. This unit can be fixed on a wall using the fixture provided. Before fixing it, make sure the indoor unit can be controlled fr ...

ENGLISH AUTOMATIC OPERATION The device will automatically determine the mode of operation, HEAT, COOL or DEHUMIDIFY depending on the initial room temperature. The selected mode of operation will not change when the room temperature varies. I As the settings are stored in memory in the remote controller, you only have to press the (START/STOP) bu ...

HEATING OPERATION G Use the device for heating when the outdoor temperature is under 21°C. When it is too warm (over 21°C), the heating function may not work in order to protect the device. Press the FUNCTION selector so that the display indicates (HEAT). Set the desired FAN SPEED with the (FAN SPEED) button (the display indicates the setti ...

ENGLISH DEHUMIDIFYING OPERATION Use the device for dehumidifying when the room temperature is over 16°C. When it is under 15°C, the dehumidifying function will not work. I Dehumidifying Function When the room temperature is higher than the temperature setting: The device will dehumidify the room, reducing the room temperature to the preset level. ...

COOLING OPERATION Use the device for cooling when the outdoor temperature is 22-52°C. If humidity is very high (over 80°C) indoors, some dew may form on the air outlet grille of the indoor unit. Press the FUNCTION selector so that the display indicates (COOL). Set the desired FAN SPEED with the (FAN SPEED) button (the display indicates the set ...