Sharp MD-M2H Operation Manual

OPERATION MANUAL MODEL MD-M2H Page SPECIAL NOTES .............................................. 1 ACCESSORIES ................................................. 2 PRECAUTIONS ................................................. 2 NAMES OF CONTROLS AND INDICATORS .... 3-5 PREPARATION FOR USE.............................. 6-8 SETTING THE CLOCK .... ...

The mains lead of this product is fitted with a non- rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug must be used. Always refit the fuse cover after replacing ...

I General G Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10cm (4") of free space along the sides and back. There must also be a minimum of 20cm (8") of free space on the top of the unit. G Do not use oil, solvents, petrol, paint thinners or insecticides on the unit. G Do not ...

1. On/stand-by Button 2. (MD) Display Button 3. Timer Stand-by Indicator 4. MD Compartment 5. (MD) Record Button 6. (CD/MD/TUNER) Memory Button 7. (CD/MD) Stop Button (TUNER) Tuning Down Button 8. (CD/MD) Play/Pause Button (TUNER) Tuning Up Button 9. Function Selector Buttons 10. CD Eject Button 11. (RDS) Programme Type/Traffic Informa- tion ...

1. Level Meters 2. Character Information Display 3. Surround Indicator 4. Extra Bass Indicator 5. FM Stereo Indicator 6. FM Stereo Mode Indicator 7. (CD/MD) Disc Indicator 8. (CD/MD) Track Indicator 9. (CD/MD/TUNER) Memory Indicator 10. (CD/MD) Repeat Indicator 11. (CD/MD) Play/Pause Indicator 12. (MD) TOC Indicator 13. (CD/MD) Random Play ...

1. Remote Control Transmitter LED 2. (RDS) Programme Type/Traffic Informa- tion Search Button 3. (RDS) Station Selector Button 4. Clock Button 5. Surround Button 6. Timer Button 7. Name/TOC Edit Button 8. Sleep Button 9. (TUNER) Preset Up/Down Buttons 10. Extra Bass Button 11. Preset Equalizer Button 12. (MD) Display Button 13. Enter Butto ...

I Aerial connection I Speaker connection Connect each speaker wire to the SPEAKER ter- minals as shown. Use speakers with an impedance of 4 ohms or more, as lower impedance speakers can damage the unit. Caution: G Before connecting the speakers to the unit, con- nect the speaker wires to the speakers first. Then, connect the speaker wir ...

I Connecting the AC power lead Connect the AC power lead to the AC INPUT socket, then connect the AC power lead plug to an AC socket. Notes: G Unplug the AC power lead from the AC socket if the unit will not be in use for a prolonged period of time. G Never use a power lead other than the one sup- plied. Use of a ...

(UM/SUM-3, R6, HP-7 or similar) 15 Remote sensor 0.2 m - 6 m (8" - 20') (Continued) I Remote control I To change the brightness of the display When bright When dark Ï G When inserting or removing the batteries, push them toward the battery terminal. G Installing the batteries incorrectly may cause the unit to malfunction. Pr ...

4,6,8 2 1 3,5,7,9 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CLOCK button. DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN REC kHz MHz SLEEP 3 Within 5 seconds, press the ENTER button. DISC TOC TRACK MEMORY RANDOM TOTAL REMAIN REC kHz MHz SLEEP 4 Press the or button to select the time display mode. DISC TOC TRACK MEMORY R ...