Hughes & Kettner PROJECTOR Manual 

1. PROJECTOR System Components . . . . . .6 1.1 PROJECTOR MID-HIGH UNIT . . . . . . . . . . . . . .6 1.2 PROJECTOR SUB 1 and SUB 2 . . . . . . . . . . . . .7 2. Setting up the System . . . . . . . . . . . . . .8 2.1 Standard System . . . . . . . . . . . . . . . . . . . . . .8 2.2 Standard System with Tilt Unit ...

1.1 MID-HIGH UNIT The top unit of the active PROJECTOR system houses a 12” B&C woofer and a B&C 2" high-frequency driver, both loaded onto 60° x 40° concentric horns, as well as all the necessary active electronic components to control and drive them. The Mid Throw / Long Throw switch lets you choose one ...

The PROJECTOR SUB 1 and SUB 2 subwoofers are each equipped with a horn-loaded 18" B&C speaker. The horn and pressure chamber of these cabinets are designed so that sound pressure waves actively cool the massive magnet and voice coil of the 600-watt speaker; the harder it works, the stronger the cooling effect. T ...

2.1 Standard System Setup/Stacking: SUB 1 – SUB 2 – MID-HIGH UNIT! Here’s how you set up the standard system configuration: Always set up the cabinets as illustrated in the diagram. Set SUB 1 on the floor, SUB 2 on SUB 1, and the MID-HIGH UNIT on top of the stack. In this configuration, the subwoofers form a fu ...

1. Set the PROJECTOR system up as described above 2. Remove the recessed socket head screws (A) from the SUB 2’s side panels (two screws per side) as well as from the MID-HIGH UNIT’s panels (1 screw per side) 3. Attach the Tilt Unit’s steel brackets (B) to the SUB 2’s housing usin ...

The integrated design of the PROJECTOR system minimizes the effort involved in connecting cables. Make sure that all of the system’s mains switches are set to the OFF position. Connect the signal-carrying cable from your mixer (master left/right, line out or a similar circuit) to the balanced input on one of the sys ...

1. Don’t expose electronic circuitry to moisture! When you set the system up outdoors, be sure to protect it against rain. Keep soft drinks, beer or any other liquids well away from the cabinets to protect their electronic components from short circuits. 2. To assure proper ventilation, make sure that cabinets a ...

FLYING THE SYSTEM PROJECTOR MID-HIGH Installation Instructions According to TÜV Directives TÜV (Technischer Überwachungsverein) is Germany’s safety standards aut- hority. These instructions explain the installation procedure for HK AUDIO PROJECTOR MID-HIGH speaker cabinets equipped with Aeroquip rails. The ...