InFocus LP425 Operation & User’s Manual

Safety Summary iii Introduction 1 Image Resolution 1 Compatibility 1 Unpacking the Projector 1 Usage Guidelines 3 If You Need Assistance 4 Warranty 4 Setting up the Projector 5 Connecting an IBM-Compatible Computer 7 Connecting a Macintosh Computer 8 Connecting a Video Player 9 Powering up the Projector and Adjusting the Image 11 Turning ...

37 Using Video Mirroring with a PowerBook Computer 42 Projected Image Size 43 Index 45 ...

using your new projector. Failure to comply with safety instruc- tions may result in fire, electrical shock, or personal injury and may damage or impair protection provided by equipment. Please save all safety instructions. Safety Definitions: • Warning: Statements ident ...

refer to the User’s Guide. Warning: Hot surface. Do not touch. An arrow pointing to the lamp door on the projector. Customer Service If you need assistance, call In Focus Customer Service directly at 1-800-799-9911. Support is free between 5 a ...

senter. It packs SVGA graphics with 16.7 million colors into a small, 6.8 pound package. It generates crisp, clear images using Digital Light Processing™ (DLP) technology. The LP 425 is easy to connect, easy to use, and easy to maintain. NOTE: The 425 automatically expands 6 ...

shipping box may vary depending on the projector configuration you’ve ordered. FIGURE 1 Shipping box contents 1. LP 425 projector 5. RCA audio/video (A/V) cable 2. Soft carry case 6. Audio cable 3. LP 425 User’s Guide and Online User Guide CD 7. Macintosh adaptor 4. power cord 8. CableWizard Lite cable ...

Usage Guidelines Do not look directly into the projection lens when the projector is turned on. The bright light may harm your eyes. Do not block the grills on the projector. Restricting the air flow can cause it to overheat and turn off. If this happens, you must wait a minute before attempting to turn it back on. Handle ...

The first place to look for help is in this manual. Be sure to check the guidelines in “Troubleshooting” on page 29. If this manual doesn’t answer your question, call your In Focus dealer. You can also call In Focus Customer Service directly at 1-800-799-9911. Call between 5 a.m. and 5 p.m. PST, Monday t ...

1 Place the projector on a flat surface. • The projector must be within 10 feet (3 m) of your power source and within 6 feet (1.8 m) of your computer. • If you want to project from behind a translucent screen, set up the projector behind your screen. See “Rear Projection” on page 23 to reverse the image. 2 Position the proj ...

make sure the projector and your equipment are turned off. If you’re connecting a computer, make sure the distance between it and the projector is 6 feet or less. FIGURE 4 Connector panel CableWizard s-video composite video L/R audio in audio in computer Lite (for video source) ...