Intermec EasyCoder 101 Operation & User’s Manual

6001 36th Avenue West P.O. Box 4280 Everett, WA 98203-9280 U.S. service and technical support: 1.800.755.5505 U.S. media supplies ordering information: 1.800.227.9947 Canadian service and technical support: 1.800.688.7043 Canadian media supplies ordering information: 1.800.268.6936 Outside U.S. and Canada: Con ...

Warranty Information v Safety Summary v Warnings, Cautions, and Notes iv Other Intermec Manuals vi Downloading and Installing Software Getting Ready 1-3 Select a Printing Protocol 1-3 Remove Old Intermec Drivers 1-3 Set IPL Printer Label Parameters 1-3 Installing Printer Drivers and Utilities 1-4 Download the Inter ...

iv Using ActiveX Controls Understanding Intermec ActiveX Controls 4-3 Using Intermec ActiveX Controls With Microsoft Word 4-3 Using Intermec ActiveX Controls With Microsoft Excel 4-4 Using Intermec ActiveX Controls With Microsoft Access 4-4 Appendix Printing Protocols A-3 Deleting Intermec Printer Driv ...

v Before You Begin This section introduces you to standard warranty provisions, safety precautions, warnings and cautions, document formatting conventions, and sources of additional product information. Warranty Information To receive a copy of the standard warranty provision for this product, contact your local Intermec support services org ...

vi Warnings, Cautions, and Notes The warnings, cautions, dangers, ESD procedures, and notes in this manual use the following format. Warning A warning alerts you of an operating procedure, practice, condition, or statement that must be strictly observed to avoid death or serious injury to the persons w ...

1-3 1 Use the information in this chapter to become familiar with the installation process and to download and install the necessary printer drivers and utilities to your IPL or Direct Protocol (DP) EasyCoder printer. Getting Ready Before you download and install the printer drivers and software utilities, complete the fol ...

1-4 communication with your PC and Windows, these tasks must be done while the printer is connected directly to your PC and not via the network. After sending the label parameters to the printer, you can complete the network connection and add the printer to Windows. To set IPL printer label parameters ...