Intermec EasyCoder F2 Installation & Operation Manual

Installation & Operation, IPL Version P/N 1-960552-00 Edition 1 August 2001 ...

1 Preface Preface Table of Contents.................................................................................1 Copyright Information....................................... ...

2 Preface Contents, cont. 6. Setting Up the Printer, cont. - Stop Bits......................................................................................35 - Protocol................................. ...

3 Preface Contents, cont. Appendix 1 Technical Data...................................................................................62 Appendix 2 Media Specifi cations.............................. ...

4 Preface FCC Notice (United States of America) WARNING This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply ...

5 Preface Declaration of Conformity We, Intermec Printer AB Idrottsvägen 10 Box 123 S-431 22 Mölndal Sweden declare under our sole responsibility1 that the product EasyCoder F2 to which this declaration relates is in conformity with the following standards EMC: EN 50 081-1:1992 EN 55 ...

6 Chapter 1 Introduction The EasyCoder F2 is a sturdy medium-duty direct thermal/thermal transfer printer with a printhead resolution of 8 dots per mm (203.2 dots per inch) and a maximum print width of 56 mm (2.2 inches). The EasyCoder F2 is delivered with the Intermec Programming Langua ...

7 Chapter 1 Introduction Safety Precautions Product Labeling Intermec assumes no responsibility regarding the CE Directive if the printer is handled, modifi ed, or installed in any way other than described in Intermec’s manuals. Caution • Read this manual carefully before connec ...

8 Chapter 2 1/. Type and quantity may vary, or labels/ribbon may be omit- ted completely, depending on area of distribution. Installation Unpacking Before you install the printer, examine the package for possible damage or missing parts: • Open the box and lift the printer out. • ...

9 Chapter 2 Installation Front View At the front of the printer are the display window, the control lamps, and the keyboard. These features allow the operator to control and set up the printer manually. The printed labels, tickets, or tags are presented at the front of the print mechan ...