ITT ICB Installation, Operation And Maintenance Instructions

en Goulds-Volute Casing Pumps Model: ICB Installation, Operation and Maintenance Instruction Translation of the Original Operation Manual en Keep for further use ! Pay attention to this operating instruction before the delivery, installation, start-up a.s.o.! © ITT Austria GmbH ...

Model ICB ICB 100-english page 1 Revision 02 Article No 771076102 Issue 01/2010 TABLE of CONTENTS Pump Name Plate ..................................................... 2 ATEX-Label (only for pumps in compliance with EC directive 94/9/EG)................................................ 2 1. General ...

Model ICB ICB 100-english page 2 Revision 02 Article No 771076102 Issue 01/2010 Pump Name Plate Type *) Type of pump S/N *) Serial number Year Year of construction Q Rated capacity at the operating point P Rated power at the operating point H Head (Energy head) at the operating point n Speed pall ...

Model ICB ICB 100-english page 3 Revision 02 Article No 771076102 Issue 01/2010 1. General This product corresponds with the requirements of the Machine directive 2006/42/EG. The staff employed on installation, operation, inspection and maintenance must be able to prove that they know about the re ...

Model ICB ICB 100-english page 4 Revision 02 Article No 771076102 Issue 01/2010 Safety instructions attached directly to the pump resp. unit must be followed under any circumstances. Further they must be kept in good readable condition. In the same way, as these Operating Instructions of the pump, ...

Model ICB ICB 100-english page 5 Revision 02 Article No 771076102 Issue 01/2010 If the operator can´t guarantee that, according monitoring measures must be provided. Equally all seal casings, auxiliary systems of the shaft sealing, as well as heating and cooling systems must be filled carefully. ...

Model ICB ICB 100-english page 6 Revision 02 Article No 771076102 Issue 01/2010 2.7.7 Electric switches and control device, Instrumentation and accessories Electric switches and control devices, instrumentation and accessories must correspond with the valid safety requirements and regulations for ...

Model ICB ICB 100-english page 7 Revision 02 Article No 771076102 Issue 01/2010 Position (6) - Material pump casing (same coding as impeller, cast iron not available) Position (7) - Stub shaft 2 - without shaft sleeve (Duplex 1.4462 std) Position (8) - IEC Motor size 3.2 Shaft Sealing Pumps of des ...

Model ICB ICB 100-english page 8 Revision 02 Article No 771076102 Issue 01/2010 Suction nozzle Discharge nozzle Forces in N Torques in Nm Forces in N Torques in Nm Sizes ∅DN Fx Fy Fz ∑F Mx My Mz ∑M ∅DN Fx Fy Fz ∑F Mx My Mz ∑M 40-25-160 40 700 620 560 1100 730 500 590 1070 25 420 400 48 ...