Krown K-EQ40 Instruction Manual

Krown Manufacturing, Inc. 3408 Indale Road, Fort Worth, Texas 76116 voice: (817) 738-2485 | TTY: (817) 738-8993 | Fax: (817) 738-1970 E-mail: [email protected] | Web site: www.KrownMfg.com ...

phone. This phone has been designed for those individuals with mild to moderate hearing loss. The K-EQ40 is designed to control the volume of the phone as well as the frequencies that best fit your hearing. The K-EQ40 has three pitch control buttons allowing you to cust ...

We have designed the Equalizer 40 to conform to the federal regulations and you can connect it to most telephone lines. However, each device you connect to the phone line draws power from the phone line. This power draw is the device’s Ringer Equivalence Number, or REN. The REN is on the bottom of your phone. If you are using more than one ...

line is not a modular jack, you can update the wiring yourself, using jacks and adapters available at your local electronics store. Or, you can let the telephone company update the wiring for you. • The USOC number of jack to be installed is RJ11C or RJ11W for a wa ...

If you prefer a wall-mounted phone to a desktop phone, you can mount the phone on a wall plate or directly on a wall. Attach the mounting bracket to the bottom of the phone so there is a second keyhole slot for wall mounting. Remove the handset from its cradle and turn the phone upside down. Inset the two smaller t ...

cord into the jack on the back of the base. 3. Plug the other end of the long telephone cord into a modular phone jack, then fit the keyhole slots over the screw heads and slide the base downward to secure it. 4. Before you hang up the phone’s handset, slide up the handset holder to remove it, turn it over so ...

The phone’s 3-band equalizer boosts the sound of three frequency ranges (600 Hz, 1.2 kHz, 2.4 kHz) to compensate for the ear’s limited sensitivity in these ranges. To adjust the settings, open the cover next to the EQUALIZER button (it reads Krown Manufacturing). Slide each switch toward “+” to increase or amplify sound, or toward ...

To dial a number stored in an emergency memory location (the buttons with symbols) lift the handset and press (insert picture). To dial a number stored in a standard memory location, lift the handset and press MEMORY, then the desired memory location of the number (0-9). For example, to dial 817-738-2485 the number we stored above, li ...

� ACTA. On the bottom of this equipment is a label that contains, among other information, a product � identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the' � telephone company. b)� An applica ...