LevelOne FPS-2111TXU Operation & User’s Manual

Print Server Mode - Bindery If Bindery Print Server Mode is selected, the following screen will appear: Figure 6: Bindery Print Server Mode Data Print Server Name Change the name of the selected LevelOne Printer Server if you wish. (This field is also on the Configuration-System menu.) Master File Server Name of the LevelOne Printer ...

LevelOne FPS-2111TXU NDPS (NetWare 5) Overview • The LevelOne Printer Server must first be configured as a valid device on your TCP/IP network. See Chapter 7 - TCP/IP for details. • To use DNPS (Novell Distributed Printing Services), the Novell server must be running Novell NetWare 5, and the PCs (clients) must be running IntranetWare Client V2.2. o ...

LevelOne FPS-2111TXU • Use the Change Context button to change the current context. The Available Operators list on the right will then change to show the queues available in that context. • Assign an operator by selecting them on the right, and clicking the “<<” button. • Remove an assignmen ...

NetWare Problem No. 1 My LevelOne Printer Server prints garbage. Solution No. 1 Follow the following steps to identify the problem: 1. Print a diagnostic file using PSConfig program. (a) Run PSConfig and select your LevelOne Printer Server from the list. Then select Print Diagnostic Report (b) Select each port in turn and print a di ...

LevelOne FPS-2111TXU Networking environment. Overview In a peer-to-peer environment, each PC communicates directly with the LevelOne Printer Server. The LevelOne Printer Server supports both NetBEUI and TCP/IP. Both protocols can be used simultaneously. The following Windows versions are supported ...

LevelOne FPS-2111TXU AppleTalk Settings When editing the CONFIG file, only the parameter should be changed. The parameter is the last part of the line, after the colon (:). Ensure that you use only valid parameters. 0001 Device Name: xxxxxxxx The Device Name will initially be the Default Server Name. The Default Server Name is shown on a sticker on the ...