ATCOM AXE4DL Operation & User’s Manual

www.atcom.cn 1 Content CHAPTER 1 THE INTRODUCTION OF AXE4DL............................................................................................3 CHAPTER 2 HARDWARE INTRODUCTION..................................................................................................5 CHAPTER 2 TEST ENVIRONMENT.................... ...

www.atcom.cn 2 Contact ATCOM The Introduction of ATCOM ATCOM is the leading VoIP hardware manufacturer in global market. We have been keeping innovating with customer’s needs oriented , working with partners to establish a total solution for SMB VoIP with IP phone , IP PBX and Asterisk cards. With over 10 years’ experience o ...

www.atcom.cn 3 Chapter 1 the Introduction of AXE4DL Overview of the AXE4DL AXE4DL Asterisk card is the asterisk PCI-E card which supports four ISDN PRI E1/T1/J1 ports, optional with teleco-grade hardware echo cancellation. Using AXE4DL digital PRI card, open source Asterisk PBX and stand alone PC, users can create their IP PBX t ...

www.atcom.cn 4 Voice Modes PRI CPE and PRI NET: EuroISDN 4ESS(AT&T) 5ESS(Lucent) DMS100 Hardware Requirement 1.6-Ghz Pentium IV 512 MB RAM PCI-E slot AXE4DL Dimension 120mm (Length)*64mm (height) Operating System Linux (all versions, releases and distributions from 1.0 up) ...

www.atcom.cn 5 Chapter 2 Hardware Introduction AXE4DL The Front View of EC128L ...

www.atcom.cn 6 LED: The LED of the four ports will be red clearly, when the driver of the card is loaded correctly and the “/etc/dahdi/system.conf” file is configured correctly, ; the LED will be green clearly, when the PRI line is connected correctly, and it synchronizes to the other equipment successfully, . C2: It is used ...

www.atcom.cn 7 C1: It is used to select the hardware echo cancellation direction. In default, It will not use the jumper, and it will delete the echo for the far end side; if users need delete the echo for the local side, please use the jumper like the following illustration. Delete the echo for the local side Delete the echo fo ...

www.atcom.cn 8 Chapter 2 Test Environment Test Environment: Libpri-1.4.7 dahdi-linux-complete-2.6.2+2.6.2 asterisk-1.8.7.0 Centos6.0 (kernel version: 2.6.32-279.22.1.el6.i686) AXE4DL+EC128L ...

www.atcom.cn 9 Chapter 3 Software Installation After inserting the card into the PCI slot and boot the server, please use the “lspci” command to check the PCI bus compatibility. From the correct output, users can see the following line: ----------------------------------------------------------------------------------------- ...