Numark C3 Quick Start Manual

ENGLISH ( 3 – 9 ) � MANUAL DE INICIO RÁPIDO ESPAÑOL ( 11 – 17 ) � GUIDE D’UTILISATION RAPIDE FRANÇAIS ( 19 – 25 ) � MANUALE RAPIDO DI UTILIZZAZIONE ITALIANO ( 27 – 33 ) � KURZANLEITUNG DEUTSCH ( 35 – 41 ) ...

such as turntables and CD players, or incorporating digital sources, such as laptops, the C3USB offers a variety of analog and digital input options designed to meet the needs of the modern DJ. In addition to its impressive input options ...

TO PHONO 1 TO PHONO 3 TO LINE TO LINE HOUSE AMP DJ HEADPHONE TO AMP TO AMP TO MIC TO MIC CD BURNER TAPE DECK or FROM RECORD OR MP3 PLAYER DUAL CD PLAYER TO LINE TO LINE TO LINE TO LINE TO LINE ...

1 2 3 4 5 6 7 8 9 10 7 8 9 7 8 9 7 8 9 7 8 9 10 10 10 10 12 12 12 12 12 13 13 13 13 13 11 11 11 11 11 20 19 18 19 20 15 14 17 21 25 25 16 22 24 23 26 1. POWER LED – Illuminates when the mixer is on. 2. MIC ON/OFF – Mutes and unmutes the microphone signal. When muted (LED is off), the microphone signal will not be routed to the mas ...

commands to compatible fader-start devices connected to the rear panel. To take advantage of fader start, connect your mixer to a fader-start compatible device, using standard 1/8” stereo cables. When you move the crossfader toward the active channel, the attached dev ...

functionality of the USB ports. USB A: RECORD – Outputs the Record mix to your computer for recording purposes. CH3 – Sends incoming audio from your computer to mixer’s Channel 3 (you will need to set the channel’s input selector switch to USB A). USB B: MASTER – Outputs the Master (Program) mix to ...

2. Use a USB cable to connect one (or both) ports of the C3USB to your computer. 3. Windows will immediately recognize the mixer as a “USB Audio Device” or “USB Audio CODEC”. To change system audio preferences on a Mac, you will need to access the Audio MIDI Setup preferences located in Appl ...

• The mixer is not turned on. Turn on your mixer. • The USB cable is not connected. Connect the USB cable to your computer and mixer. • You have already installed a USB Audio Device before. In that case, your mixer should work without any installation process. Just plug it in. Yo ...