Oki GL408e Install Manual

1 General 1.1 Important information This quick guide provides important information on how to setup your new SATO product. Be sure to read this quick guide thoroughly before using this printer. It is an integral part of the product and should be kept in the immediate vicinity of the device and available to the operating st ...

Oki GL408e Dispenser setup via the LCD Menu 1. Turn the printer ON and wait for it to initialize and go into ONLINE mode. 2. Press the Line Button to go to OFFLINE mode. 3. Press the Function Button to display the different menu icons 4. Select the Advanced Mode Menu and press the Enter Button. 5. Scroll to the Media Handlin ...

Oki GL408e GL4xxe Label Cutter Installation 1 5 3 4 3 2 The Label Cutter is housed in a cover assembly that is designed to replace the factory-installed front cover of the GL4xxe series printer. Follow the procedures below to install the Label Cutter. 1. Make sure the printer is OFF and disconnected from the power supply. 2. Lift up t ...

Oki GL408e CUTTER INSTALLATION GUIDE GL 4xxe Series For printer models: Read this Installation Guide before and during the installation of the above accessory. Keep this Installation Guide handy for future reference. ...

1.4 Contact and Document Information . Extensive contact information of worldwide SATO operations can be found on the Internet at www.satoworldwide.com Version: SI-GL4xxe-01rA-05-06-07-CUTIG © Copyright 1994 – 2007 All rights reserved. No part of this document may be reproduced or issued to third parties in any form wha ...

Oki GL408e 1.3 Explanation of symbols This instruction manual uses various warning icons to help you understand the safe operation of your printer. Explanations of the icons are below. WARNING! Indicates neglectful or erroneous use may cause irreparable damage to the product, serious injury to the operator, or worse. CAUTION! Indicate ...