Oki GL408e Manuals

Oki GL408e Install manual (14 pages)

• Identifier: id-597386
• Brand: Oki
• Device: Printer
• Type: Install manual, PDF
• Key Aspects: Recovery Procedures After Failures, Usage Recommendations Under Different Conditions, Proven Benefits of Use
• UPD Date: 11.03.2026
• Source File: 590233.pdf
• Pages: 14
• Description: Operation and maintenance manual for the Oki GL408e. The manual details user settings, network setup, installation steps.

Key Pages and Contents:

• WLAN Card Installation Guide

  1.3 Explanation of symbols This instruction manual uses various warning icons to help you understand the safe operation of your printer. Explanations of the icons are below. WARNING! Indicates neglectful or erroneous use may cause irreparable damage to th

• WLAN Card Installation Guide

  1.4 Contact and Document Information . Extensive contact information of worldwide SATO operations can be found on the Internet at www.satoworldwide.com Version: SI-GL4xxe-01rA-05-06-07-WLCIG © Copyright 1994 – 2007 All rights reserved. No part of this

• WLAN Card Installation Guide

  Menu screen What the options mean Communication Protocol. Selects the mode of Bi-Directional communications. In most cases this menu does not need to be altered and is meant to help support legacy applications which may have incorporated ol

• WLAN Card Installation Guide

  Permits entry into the INTERFACES Mode. INTERFACES Is the menu selection screen for the INTERFACES Mode. INTERFACES Ignore CR/LF Item No. Check BCC Check History Buffer Comm. Protocol Host Interface ETHERNET PORT ETHERNET SETTING WLAN ADDRESS

Oki GL408e Install manual (13 pages)

• Identifier: id-597387
• Brand: Oki
• Device: Printer
• Type: Install manual, PDF
• Key Aspects: Best Practices for Use, Warranty Registration Instructions, System Recovery Procedures
• UPD Date: 21.06.2026
• Source File: 590234.pdf
• Pages: 13
• Description: Setup instructions for the Oki GL408e. This documentation guides on warranty information, security instructions, service procedures.

Key Pages and Contents:

• 2) Mounting the printer above the rewinder-dispenser

  To facilitate easier mounting, it is recommended that you remove the front cover of the internal rewinder-dispenser beforehand. Pull down the side cover of the internal rewinder and remove two bind scre

• 1) Removing the base of the printer (cont’d)

  The fifth screw to be removed is shown here. The sixth and seventh screws are shown here, securing the base to the front of the chassis. The last two screws are on the electronic section as circled here in orange. Figure 1e. Removing the fifth of nine

• INTERNAL REWINDER-DISPENSER INSTALLATION GUIDE

  For printer models: GL 4xxe Series Read this Installation Guide before and during the installation of the above accessory. Keep this Installation Guide handy for future reference.

• 1.3 Explanation of symbols

  This instruction manual uses various warning icons to help you understand the safe operation of your printer. Explanations of the icons are below. WARNING! Indicates neglectful or erroneous use may cause irreparable damage to the product, serious injury to the operator,

Oki GL408e Install manual (11 pages)

• Identifier: id-597388
• Brand: Oki
• Device: Printer
• Type: Install manual, PDF
• Key Aspects: Periodic Maintenance Tasks, System Recovery Procedures
• UPD Date: 15.04.2026
• Source File: 590235.pdf
• Pages: 11
• Description: Practical user guide for the Oki GL408e. This documentation outlines supported accessories, device features, product specifications, control functions.

Key Pages and Contents:

• 1.3 Explanation of symbols

  This instruction manual uses various warning icons to help you understand the safe operation of your printer. Explanations of the icons are below. WARNING! Indicates neglectful or erroneous use may cause irreparable damage to the product, serious injury to the operator,

• 11

• RFID KIT INSTALLATION GUIDE

  Read this Installation Guide before and during the installation of the above accessory. Keep this Installation Guide handy for future reference. For printer models: For printer models: GL 4XXe Series

• Removing the front cover

  Tool(s) required Flat blade screwdriver (recommended) 1. Loosen and remove the thumbscrew fastener that secures the front cover. 2. Pull the outer edge of the front cover outwards, and then push the entire cover in the direction shown by the arrow. The cover will be dislod

Oki GL408e Install manual (7 pages)

• Identifier: id-597391
• Brand: Oki
• Device: Printer
• Type: Install manual, PDF
• Key Aspects: Accessibility Information, Glossary of Terms
• UPD Date: 04.08.2026
• Source File: 590238.pdf
• Pages: 7
• Description: Official product manual for the Oki GL408e. The manual outlines system configuration and interface navigation, software updates, safety precautions.

Key Pages and Contents:

• Simple-Cutter Installation Guide

  1 General 1.1 Important information This quick guide provides important information on how to setup your new SATO product. Be sure to read this quick guide thoroughly before using this printer. It is an integral part of the product and should be kept in the immedi

• Simple-Cutter Installation Guide

  1.4 Contact and Document Information . Extensive contact information of worldwide SATO operations can be found on the Internet at www.satoworldwide.com Version: SI-GL4xxe-01rA-05-06-07-CUTIG © Copyright 1994 – 2007 All rights reserved. No part of this document

• Simple-Cutter Installation Guide

  GL4xxe Label Cutter Installation 1 5 3 4 3 2 The Label Cutter is housed in a cover assembly that is designed to replace the factory-installed front cover of the GL4xxe series printer. Follow the procedures below to install the Label Cutter. 1. Make sure the printer

• Simple-Cutter Installation Guide

  Dispenser setup via the LCD Menu 1. Turn the printer ON and wait for it to initialize and go into ONLINE mode. 2. Press the Line Button to go to OFFLINE mode. 3. Press the Function Button to display the different menu icons 4. Select the Advanced Mode Men

Oki GL408e Manual  (8 pages)

• Identifier: id-597389
• Brand: Oki
• Device: Printer
• Type: Manual , PDF
• Key Aspects: Guidelines for Regular Maintenance, User Case Scenarios, Technical Support Procedures
• UPD Date: 18.06.2026
• Source File: 590236.pdf
• Pages: 8
• Description: Instruction and usage manual for the Oki GL408e. It provides guidance on wiring diagrams, energy usage, operation, firmware installation.

Key Pages and Contents:

• Real-Time Clock Installation Guide

  Figure 1. Removing the Left-Side Cover of the printer GL4xxe Real-Time Clock Installation Before installing the Real-Time Clock chip, make sure the printer is OFF and disconnected from the power supply. Make sure you have discharged any static electricity (by tou

• Real-Time Clock Installation Guide

  1 General 1.1 Important information This quick guide provides important information on how to set up your new SATO product. Be sure to read this quick guide thoroughly before using this printer. It is an integral part of the product and should be kept in the imm

• Real-Time Clock Installation Guide

  1.4 Contact and Document Information . Extensive contact information of worldwide SATO operations can be found on the Internet at www.satoworldwide.com Version: SI-GL4xxe-01rA-06-06-07-RTCIG © Copyright 1994 – 2007 All rights reserved. No part of this documen

• Read this Installation Guide before and during the installation of

  the above accessory. Keep this Installation Guide handy for future reference. REAL-TIME-CLOCK INSTALLATION GUIDE For printer models: GL 4xxe Series

Oki GL408e Manual  (8 pages)

• Identifier: id-597390
• Brand: Oki
• Device: Printer
• Type: Manual , PDF
• Key Aspects: Testing Procedures for Performance, Compliance and Certification Information, Installation Troubleshooting Tips
• UPD Date: 11.03.2026
• Source File: 590237.pdf
• Pages: 8
• Description: Comprehensive user handbook for the Oki GL408e. This documentation provides step-by-step guidance on dimensions and layout, setup tips, replacement parts, safety information.

Key Pages and Contents:

• Simple-Dispenser Installation Guide

• Simple-Dispenser Installation Guide

  Dispenser setup via the LCD Menu 1. Turn the printer ON and wait for it to initialize and go into ONLINE mode. 2. Press the Line Button to go to OFFLINE mode. 3. Press the Function Button to display the different menu icons 4. Select the Advanced Mode Menu and p

• Read this Installation Guide before and during the installation

  of the above accessory. Keep this Installation Guide handy for future reference. SIMPLE-DISPENSER INSTALLATION GUIDE GL 4xxe Series For printer models:

• Simple-Dispenser Installation Guide

  GL4xxe Simple-Dispenser Installation 4. Affix the dispenser (3) to the printer by plugging the white connector (4) into the complementary connector (4) on the printer. 5. Mount the simple dispenser by hooking it as shown in the illustration at the bottom of th