Precision Power E.DZ Owner's Manual And Installation Manual

design and engineer the world's finest audio products. Our award winning products utilize innovative design and technology to consistently deliver Absolutely State of the Art performance, sound quality, reliability, and value. This PrecisionPower product refl ...

1.Input Selection Switch 2.Master Volume Control 3.Subwoofer Level Control The Subwoofer Level Control will increase or decrease the output level of the subwoofer pre-amp output in relation to the Master Volume Control. 4.Graphic Equalizer Controls The Graphic Equalizer Controls will increase or decrease the level of its corresponding ...

The CD Gain Selector will increase or decrease the input sensitivity of the CD input. We suggest if your source unit's pre-amp voltage is 4V or greater, set the sensitivity switch to HI. If your source unit's pre-amp voltage is 2V-4V, set the sensitivity switch to MID. If your source unit's pre-amp voltage is less than 2V, set the sensiti ...

1.12V Constant Power Lead (red): This is the main power input for the E.DZ and must be connected to a (+)12V constant power supply. DO NOT connect this to a switched 12V source or the system may pop when the key is turned off. 2.Remote Turn-On Input Lead (orange): This is the input for turning on the E.DZ and system amplifiers. ...

2.Always disconnect the battery or remove the fuses for circuits you will be working on. 3.Check for clearance of any hazards such as wiring harnesses or heater core before mounting the equalizer to any panels in the vehicle. 4.Mount the equalizer in ...

the source unit, play a familiar track, and set the volume level to approximately 75%. 2.Set all individual Graphic Equalizer Controls to 0dB. Master Volume Control and Subwoofer Level Control should be set to minimum, and fader set to even. 3.Pres ...

LIMITED TWO-YEAR CONSUMER WARRANTY WITH PURCHASE AND INSTALLATION BY A PRECISION POWER AUTHORIZED DEALER Precision Power promises to the original purchaser, to repair or replace this product with a new or refurbished unit (at Precision Power's sole and absolute discretion) should it prove to be defective ...