Pro-Form 590 LT Operation & User’s Manual

Serial No. Write the serial number in the space above for future reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CON- TACT THE STORE; please contac ...

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . ...

sult your physician. This is especially impor- tant for persons over age 35 or persons with pre-existing health problems. 2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. Use the treadmill only as described. 3. Place th ...

is running. Always remove the key, unplug the power cord, and switch the reset/off cir- cuit breaker to the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the circuit breaker.) 20. Do not attempt to raise, lower, or move the treadmill until it is properly assem ...

treadmill. The 590 LT treadmill offers a selection of fea- tures designed to make your workouts at home more enjoyable and effective. And when youʼre not exercis- ing, the unique treadmill can be folded up, requiring less than half the floor space of other treadmills. For your benefit, read this manual care ...

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubrican ...

With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (57) so that the treadmill is more stable; do not fully fold the Frame yet. Cut the shipping tie securing the Wire Harness (92) to the Base (99). Next, locate a tie in the in- dicated hole in the Base, an ...

M10 x 50mm Bolt (26) and an M10 Locknut (36). Do not overtighten the Locknut; the Wheel must turn freely. 26 36 3 95 99 4. Identify the Right Upright (80) and the Right Upright Spacer (90), which are marked with “Right” stickers. Insert the Wire Harness (92) through the Right Upright Spacer (90) as shown. ...

91 99 6 7. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (57) so that the treadmill is more stable; do not fully fold the Frame yet. Attach a Wheel (95) to the Base (99) with an M10 x 50mm Bolt (26) and an M10 Locknut (36). Do not overtighten the Lock ...

With the help of a second person, tip the treadmill so that the Base (99) is flat on the floor. 91 99 9 10. Remove the Resistance Knob (88) from a resis- tance mechanism. Make sure that the 3/8" x 4 3/4" Bolt (3) stays inside the resistance mechanism and that the resistance mecha- nism does not come apart. Note ...