CHICAGO 92772 Operating Instructions Manual

Visit our Web site at: http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent o ...

You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place ...

Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. ELECTRICAL SAFETY 1. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes ...

Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 3. Avoid accidental starting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugg ...

any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly main- tained tools. 8. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable f ...

PAGE 6 8. Always turn off the Jigsaw and unplug the tool from its electrical outlet before changing accessories or performing any inspection, maintenance, or cleaning procedures. 9. Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Jigsa ...

D. Support large panels to minimize the risk of Saw Blade pinching and kickback. Large panels tend to sag under their own weight. Supports must be placed under the panel on both sides, near the line of cut and near the edge of the panel. E. Do not use a dull or damaged Saw Blade. Unsharpened or improperly ...

24. Remove all adjusting wrenches before turning on the Jigsaw. A wrench that is left attached to a moving part of the tool may result in personal injury. 25. Use safety equipment. Always wear ANSI approved safety impact eye goggles when operating the Jigsaw. A dust mask, non-skid safety shoes, hardhat, and hear ...

shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug ...

(See Figure B.) 3. The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (See Figure B.) 4. When using more than one extension cord to make up the total length, make sure each co ...