Haier D200 Operation & User’s Manual

1 Earpiece Display Fourways Navigation Key Right Soft Key Power/End Key OK/Hot key to WAP Keypad Microphone Charging Port Front View Send Key Left Soft Key Volume Side Key ...

1) Aim the protruding part at the bottom of the battery at the groove of the phone. 2) Push the top part of the battery to the phone and 3 ...

Switch off the phone, push up the lock at the top of the battery to uplift the top of the battery and separate it with the main board. 1) Make sure to switch off your phone before taking out the battery. 2) Make the metal face of the RUIM card down and put it conferring the level of the card. 3) Reinstall the battery. ...

Using the Function Menu Menu Making a call 1)Plug the charger transformer into a standard outlet. 2)Insert the charger output plug into charging connector of the bottom of the phone. 3)The rolling of the electric quantity bar indicates that the phone begins to charge. 4) When the battery level full and stop rolled, the phone will display ...

key until ‘+’ appears on screen. 3.Ending a call You can end a call at any time by holding down the key till the call has been terminated. 1.Press key or any key (need setting) to answer the call. Or press key [Silence] once to close incoming ringer, press [Accept] again to receive the incoming call. 2.Press key twice to reject the incomin ...

mobile phone service provider. In this condition, press Key to dial emergency call. Note: If you have entered the PIN code incorrectly continuously for max retry limits, the RUIM card will be automatically locked. In this condition, the phone will prompt for PUK (PIN Unlocking key). You can get the PUK from y ...

device driver provides the interface between the operating system and Haier D200 handsets, allowing user applications to communicate with devices. This installation guide is intended to provide a detailed description of the USB Windows device driver installation process. We will supply an accessory CD inclu ...

Figure 2 - USB Windows Device Driver Setup Welcome Dialog Box Figure 3 - USB License Agreement Dialog Box 2. The USB Windows Device Driver Setup Welcome dialog box will appear. 3. Click the button to continue. The License Agreement dialog box appears. 4. To continue, you must accept the License Agreement by cli ...

installation process at this time. If you select the button, the installation process is terminated. If you select the button, the License Agreement dialog box (Figure 3) will reappear. Upon agreeing to the License Agreement (Figure 3), the Customer Information Request Dialog Box will appear. 5. Please enter ...