EverFocus EQ610e Operation & User’s Manual

700TVL True Day/Night, D-WDR User’s Manual * Lens not included. Copyright © EverFocus Electronics Corp, Release Date: February, 2013 ...

2. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein. 3. Try to avoid facing the camera toward the sun. 4. Keep the power cable away from water and other liquids and never touch the power cord with wet han ...

full color with a low-light sensitivity of 0.03 lux. Delivered by a 1/3” Sony 960H CCD sensor, the camera also features the added benefits of advanced Effio-E DSP technology to enhance image quality. This camera also utilizes technologies like DNR (to redu ...

Video Format NTSC, PAL Picture Elements (H x V) NTSC: 1020 x 508 PAL: 1020 x 596 Horizontal Resolution 700TVL Sensitivity 0.03Lux / F1.2 S/N Ratio Over 52dB (AGC off) Video Output 1.0Vp-p Composite, 75Ω ; BNC Gamma Correction 0.45 Lens Type C/CS Mount (Lens sold separately) Back Light HLC / BLC ...

2.1 NAMES AND FUNCTIONS OF PARTS 2.1.1 FRONT PANEL 2.1.2 BRACKET POSITIONS The bracket in the package can be fitted to the screw holes on the top or bottom of the camera for either suspending the camera or supporting it. Light Sensor Microphone (Reserved for Audio-supporting models) Top bracket position Bottom bracket position ...

Back Panel: GND D/N Out D/N In Motion RS485- RS485+ 1 2 3 4 5 6 7 LINE IN 1 2 3 4 5 6 7 AC 24V / DC 12V + - 12 VDC / 24 VAC~ Model 90-260 VAC~ Model Side Panel: 1) Left-scroll button 2) Up-scroll button 3) Set button (push to activate OSD) 4) Right-scroll button 5) Down-scroll button 6) Video Output Connector BNC connector t ...

2. If a C-mount lens is to be used, please screw the C-mount adaptor ring (the 5mm-thick ring in the accessory pack) on to the mouth of the lens mounting. 3. Mount the lens by turning it clockwise on the lens mounting of the camera. 4. If you use an Auto Iris lens, c ...

input jack. 5. CAMERA SETUP OPERATIONS This camera utilizes an On Screen Display (OSD) user setup menu. 5.1 SETUP BUTTONS To set items on the user setup menu, use the following buttons on the back panel. EXT. SENSOR The cursor direction buttons and the SET/ ...

OSD’s main menu on the monitor that you have connected directly or indirectly to the camera’s video connector. Also press this button to confirm changes and to open the submenus when they’re available and selected. (Menu items with a “<┘” symbol at the en ...