Amit KS-111E Operation Manual

Click on button New attachment.. in dialog box Connect to FTP server Fig. 3 - TC – Attaching monitor to FTP server Enter the parameters for attaching to first monitor (APPENDIX E – Configura- tion parameters, IP monitor): Session name: Monitor_A ...

Amit KS-111E Operace přes webové rozhraní kamery Besides automatic configuration via ACM can be camera parameters changed also through web configuration interface, which each Axis camera contains. Any intervention to camera configuration (except for actions described be- low) are not recommended. They can af ...

8. Open a command prompt as Administrator. Navigate to directory with USB flash disc image and img2usb.exe tool. Fig. 59 - Directory selection 9. Run img2usb tool: img2usb.exe Fig. 60 - Run img2usb.exe tool 10. Enter the number of the connected USB flash disc ...

Amit KS-111E Camera lens position setup Position of camera lens affects the image, which is captured by camera. Posi- tioning is realized by turning the head with lens while the captured image is viewed over Live View on computer screen. Range of positioning is mechani- cally limited a bit.. Fig. 27 - Camer ...

Amit KS-111E After pressing the Close button is configuration of camera parameters com- pleted. 4.2.4 Camera lens setup (positioning and focusing) The whole process of setting the camera lens is realized in following steps:  Viewing the image from camera on service notebook. � ...

Amit KS-111E Performs recording of image from cameras on hard disk. Displays the live image from one or more cameras (maximum four). When more than camera is displayed, quadruple (4Q) mode is used, where monitor screen is splitted into 4 equal rectangulars, into which are directed video streams from cameras. Perf ...

All operations described in following chapters require previous separate web interface login. Launch the internet browser (Internet Explorer is recommended) and enter into address field an IP address of camera, web interface of which you want to view. Fig. 41 - Entering of camera IP address Internet Explore ...

Amit KS-111E Identify, in which the files from connected monitor have been displayed (from heading bar - see figure), and delete them. Fig. 6 - TC – Identification of FTP contents Copying of new application files Copy the new version of application according to APPENDIX D – Program set contents Thank ...

Amit KS-111E For detection of cameras and configuration of their parameters is used an effec- tive installation and management tool for IP cameras - Axis Camera Manage- ment verze 2.00 (in this document referred as ACM). Fig. 38 - Axis Camera Management - Main window ACM can be downloaded fro ...

Amit KS-111E Until restart of camera system has been done (power supply off and on) the new version of application does not manifest itself. When no image appears on monitors after restart, loading of files was not per- formed properly. Possible reasons are:  application versions in monitors are different  applic ...