Mojo C-130 Quick Start Manual

Power/Ethernet is not Solid Green, the AP has encountered a problem or is in the upgrade process. The following guidelines may help you to quickly diagnose and fix the problem. 1. Check whether the Ethernet cable is plugged into the correct port (PoE+) on the C-130 and ...

Mojo C-130 Quick Start Guide Package Contents The C-130 package must contain the following components. 15/16” (24mm) Mounting Bracket C-130 ...

Mojo C-130 1. Affix bracket to T - Grid. 3. Place the first mounting post on the rear-side of the device on to the lower notch of the bracket. 5. Ensure that all the mounting posts on the rear-side of the device are snapped in to the respective notches on the bracket. 4. Rotate the device such that the center mountin ...

Mojo C-130 Step 1: Power Up the Device Plug one end of an Ethernet cable into the PoE+ (802.3at) switch or injector and the other end into the Ethernet/PoE+ port on the C-130. Ensure the PoE+ source you are using is turned ON. Note: You can also use regular PoE (802.3af). However it will disable some features. To know more refer to C-130 Insta ...