Record Power BM16 Instruction Manual

Sliding Table BM16 Woodworking Machines & Accessories Telephone: 01246 561 520 Facsimile: 01246 561 529 Record Power Ltd Unit B, Adelphi Way Staveley S43 3LS Email: [email protected] www.recordpower.co.uk VERSION 2.0 IMPORTANT For your safety read instructions carefully before assembling or using this product. S ...

5 3 Record Power Guarantee 6 4 Specifications 6 5 Knowing your Machine 7 6 Contents of the Carton 8 7a Assembly - General 9 7b Assembly - Chisel and Bit 10 8 Setting up the Machine 11 9a Maintenance - General 12 9b Maintenance - Chisel and Bit 13 10 Trouble Shooting 14 - 15 11 Parts List 16 12 Certi ...

Please do not forget to fill in and return your guarantee card, this will assist us in providing you with prompt and appropriate after sales service. (This does not affect your statutory rights). PURPOSE OF THIS MANUAL This man ...

ASSEMBLY, INSTALLATION AND USE OF THIS PRODUCT. KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE. WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury. SAFE OPERATION 1. Eye Protection The ope ...

1. INTRODUCTION 1.1 We supply machinery through a network of dealers and authorised distributors and you should be aware that your contract of sale is with the retailer from whom you purchased this product. 1.2 If you are not satisfied with this product you should in the first instance approach the retailer from whom you purchased i ...

Table Height: 125mm Maximum Drill Depth: 70mm Maximum Workpiece Height: 120mm Maximum Workpiece Depth: 125mm Table Movement Side to Side: 160mm Table Movement Front to Back: 60mm Spindle Speed: 1400rpm Chisel Capacity: 6 - 16mm Chisel Shank: 13/16” Maximum Chisel Stroke: 130mm Distance from Fence to Centre of Chisel: 70mm Chuck Capa ...

6 7 1 - Operating Handle 2 - Socket Head Cap Screw 3 - Table Control Lever 4 - Stops x2 5 - Chuck Key 6 - Distance Stop Rods x2 7 - BM16 Morticer 2 3 1 4 5 6 7 ...

1) Remove the morticer from the shipping carton. 2) Place the machine onto a suitable surface, at a height that will enable you to work comfortably and to ensure that there is adequate room on either side for the size of timber you plan to use. when in position, bolt the morticer down. 3) Locate the operating lever and the grip sleev ...

the chuck. 2) Tighten the chuck and withdraw the chuck key. Gently pinch the chisel in place by finger tightening the clamping bolt. (See Pic 5) Please Note Various morticing machines require various bit shank lengths. A new bit has a shank of universal length which will b ...

General Notes The mortise will generate a lot of ‘grip’ on the chisel, especially the first cut, or if the timber is a little green. Make sure you use the table clamp assembly to help control the timber during the raise operation of the morticer. Setting the chisel Square When the chisel is tightened in the machine it must norma ...