Protech Systems PMB-881LF Operation & User’s Manual

PMB-881LF USER′S MANUAL Page: 2-3 2-2. COMPONENT LOCATIONS SIO Intel LGA 1155 Intel PCH C206 ATX_PWR1 CPU_FAN1 PMB-881LF Connector, Jumper and Component locations ...

Protech Systems PMB-881LF Page: 4-54 PMB-881LF USER′S MANUAL 4-8. Save & Exit BIOS Setting Options Description/Purpose Save Changes and Exit No changeable options Exits and saves the changes in CMOS SRAM. Discard Changes and Exit No changeable options Exits without saving any changes made in BIOS settings. Save Changes and Reset No changeable options Save ...

Protech Systems PMB-881LF PMB-881LF USER′S MANUAL Page: 4-29 4-4.9.4. Advanced – W83627UHG Super IO Configuration – Serial Port 2 Configuration BIOS Setting BIOS Setting BIOS Setting BIOS Setting Options Options Options Options Description/Purpose Description/Purpose Description/Purpose Description/Purpose Serial Port -disabled -enabled Configures the ...

Protech Systems PMB-881LF PMB-881LF USER′S MANUAL Page: 2-17 2-19. VGA CONNECTOR VGA1: VGA Connector 1 5 6 10 11 15 VGA1 PIN ASSIGNMENT 1 CRTRED 2 CRTGREEN 3 CRTBLUE 4 NC 5 GND 6 CRT_ALWAYS_ON 7 GND 8 GND 9 CRTVCC_L 10 GND 11 NC 12 CRTDATA 13 HSYNC 14 VSYNC 15 CRTCLK ...

Protech Systems PMB-881LF PMB-881LF USER′S MANUAL Page: 1-5 ���� POWER SUPPLY: 24pin ATX power supply ���� DMA CONTROLLER: 2 x 82C37 ���� DMA CHANNELS: 7 ���� INTERRUPT CONTROLLERS: 2 x 82C59 ���� INTERRUPT LEVELS: 15 ���� TEMPERATURE: Operation temperature 0°~60°C Storage temperature -40°~85°C ���� ...

PMB-881LF USER′S MANUAL Page: 2-9 2-6. COM4 RI & VOLTAGE SELECTION JP9: COM4 RI & Voltage Selection The selections are as follows: SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION 5V 5-6 1 2 5 6 12V 3-4 1 2 5 6 RI 1-2 1 2 5 6 ***Manufacturing Default -- RI. ...

Protech Systems PMB-881LF PMB-881LF USER′S MANUAL Page: 2-19 SATA4: PIN ASSIGNMENT 1 GND 2 SATA_TXPC3 3 SATA_TXNC3 4 GND 5 SATA_RXNC3 6 SATA_RXPC3 7 GND SATA5: PIN ASSIGNMENT 1 GND 2 SATA_TXPC4 3 SATA_TXNC4 4 GND 5 SATA_RXNC4 6 SATA_RXPC4 7 GND SATA6: PIN ASSIGNMENT 1 GND 2 SATA_TXPC5 3 SATA_TXNC5 4 GND 5 SATA_RXNC5 6 SATA_RXPC5 7 GND ...

Page: B-12 PMB-881LFUSER′S MANUAL B. AFUDOS command for system BIOS update AFUDOS.exe is the AMI firmware update utility; the command line is shown as below: AFUDOS [option1] [option2]…. User can type “AFUDOS/ ?” to see all the definition of each control options. The recommended options for BIOS ROM upda ...

Protech Systems PMB-881LF PMB-881LF USER′S MANUAL Page: 4-19 4-4.5.1. Advanced – SATA Configuration – AHCI Mode BIOS Setting Options Description/Purpose Port 0 Hot Plug -disable -enable Enables or disables support hot plug feature on port 0. Port 1 Hot Plug -disable -enable Enables or disables support hot plug feature on port 1. Port 2 Hot Plug -disab ...

Protech Systems PMB-881LF PMB-881LF USER′S MANUAL Page: 4-13 4-4.4. Advanced – CPU Configuration BIOS Setting Options Description/Purpose CPU Speed No changeable options Displays the current processor frequency 64-bit No changeable options Reports if 64-bit is supported by processor. Hyper-threading -disabled -enabled When disabled, only one thread per ...

Protech Systems PMB-881LF PMB-881LF USER′S MANUAL Page: 2-21 2-22. UNIVERSAL SERIAL BUS CONNECTOR USB1: Universal Serial Bus Connector The pin assignments are as follows: PIN ASSIGNMENT 1 USB_67_VCC5 2 USB_67_VCC5 3 USBN6 4 USBN7 5 USBP6 6 USBP7 7 GND 8 GND 9 NC 10 GND USB2: Universal Serial Bus Connector The pin assignments are as follows: PIN AS ...