Protech Systems BM-0947 Operation & User’s Manual

BM-0947 USER′S MANUAL Page: 4-13 4-4-3. SATA Configuration SATA cnfiguration screen BIOS Setting Options Description/Purpose SATA Controller(s) - Disabled - Enabled Enable or disable SATA Device. SATA Mode Selection - IDE - AHCI - RAID Configures SATA as IDE, AHCI or RAID(Q87 only) mode. SATA 0/1/4 [drive] Displays the drive installe ...

BM-0947 USER′S MANUAL Page: 4-39 4-7. SECURITY Security screen BIOS Setting Options Description/Purpose Administrator Password Password can be 3-20 alphanumeric characters. Specifies the administrator password. User Password Password can be 3-20 alphanumeric characters. Specifies the user password. HDD Security Configuration: Sub-men ...

Protech Systems BM-0947 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency en ...

Protech Systems BM-0947 Sections included: � Introduction � Entering Setup � Main � Advanced � Chipset � Boot � Security � Save & Exit CHAPTER 4 ...

Protech Systems BM-0947 BM-0947 USER′S MANUAL Page: 2-2 2-1. JUMPER & CONNECTOR QUICK REFERENCE TABLE JUMPER/CONNECTOR NAME COM Port COM1, COM2, COM5 COM Connector COM3, COM4, COM6 VGA Port VGA1 Keyboard & Mouse Port KB_MS1 LAN & USB3.0 Port LAN1_USB1 Audio Jack AUDIO1 COM Port RI & Voltage Selection JPCOM1, JPCOM2 COM2 RS-232/422/485 Selection ...

Protech Systems BM-0947 BM-0947 USER′S MANUAL Page: 4-6 4-3. MAIN Main screen BIOS Setting Options Description/Purpose BIOS Vendor No changeable options Displays the BIOS vendor. Core Version No changeable options Displays the current BIOS core version. Compliancy No changeable options Displays the current UEFI version. Project Version No changeable options ...

Protech Systems BM-0947 BM-0947 USER′S MANUAL Page: 4-25 4-5-1. PCH IO Configuration PCH IO Configuration screen BIOS Setting Options Description/Purpose Intel PCH RC Version No changeable options Displays the PCH source code module version Intel PCH SKU Name No changeable options Displays PCH product SKU name. Intel PCH Rev ID No changeable options Display ...

Protech Systems BM-0947 BM-0947 USER′S MANUAL Page: 2-5 2-3. HOW TO SET JUMPERS You can configure your board by setting jumpers. Jumper is consists of two or three metal pins with a plastic base mounted on the card, and by using a small plastic "cap", Also known as the jumper cap (with a metal contact inside), you are able to connect the pins. S ...

Protech Systems BM-0947 BM-0947 USER′S MANUAL Page: 2-14 2-14. FRONT PANEL CONNECTOR & SELECTION FP1: Front Panel Connector SELECTION PIN & ASSIGNMENT JUMPER SETTINGS JUMPER ILLUSTRATION 1. HDD_LED+ HDD LED 3. HDD_LED- 1-3 12 11 2 1 FP1 2. PWR_LED+ Power LED 4. PWR_LED- 2-4 12 11 2 1 FP1 5. GND Reset Button 7. RST_BTN 5-7 12 11 2 1 FP1 ...

BM-0947 USER′S MANUAL Page: 4-34 4-6. BOOT Boot screen BIOS Setting Options Description/Purpose Setup Prompt Timeout Numeric Number of seconds to wait for setup activation key. Bootup NumLock Status - On - Off Specifies the power-on state of the NumLock Key. Quiet Boot - Disabled - Enabled Enable/Disable Quiet Boot Options Boot Optio ...

Protech Systems BM-0947 BM-0947 USER′S MANUAL Page: B-3 INTERRUPT MAP IRQ ASSIGNMENT 0 System timer 1 Standard PS/2 Keyboard 3 Communications Port (COM2) 4 Communications Port (COM1) 5 Intel® 8 Series/C220 Series SMBus Controller - 8C22 7 Communications Port (COM3) 7 Communications Port (COM4) 8 System CMOS/real time clock 12 Microsoft PS/2 Mouse 1 ...