Siegenia KFV Assembly Instructions Manual

...

6 1.3 Correct use 6 1.3.1 Installation location 6 1.3.2 Locking part and hardware 6 1.3.3 Transport 6 1.4 Improper use 6 1.5 Care and service instructions 6 1.6 Installation conditions and requirements 6 1.7 Dimensions 6 1.8 Explanation of symbols 7 1.9 Instructions and symbols ...

Lock •� Based on DIN 18251-1 class 1 •� For rebated interior doors •� Quiet closing, pleasant acoustics •� The latch does not hit the door frame •� High-quality appearance thanks to flush latch position in gear box •� With permanent magnets (neodymium) in the latch and striker plate •� Brushed stainless steel sec ...

lock 111 and are valid unless revoked. 1.2 Target group of this documentation These assembly instructions are intended for use by specialists only. All work described in this document is to be performed only by experienced professionals with training and practice in the ...

��� 10 Milling cutter or drill diameter Timber (material of the door) 1.9 Instructions and symbols This symbol designates hazards that could damage the product or something in the surrounding area. This symbol indicates special features and designates facts that require increased attention. 1.10 Screw recommendation Face plat ...

1 2 3 [1] PVC backing [2] Striker plate [3] Lock The striker plate is available in twelve versions: •� With 2 or 3 fastening holes •� With file latch entry •� Without file latch entry •� With striker plate opening •� Without striker plate opening. The striker plates with deadbolt openings are suitable ...

SSP 111-1/2-F/55-L (DIN left) WES 111-1/2-BB/55-L (DIN left) WES 111-1/2-WC/55-L (DIN left) Striker plate 1 [1] WC square nut 8 mm 9 05.2016 KFV Overview ...

Milling dimensions according to DIN 18101 Remove any splinters from the lock mortise after milling. Mark the holes for the handle set, according to DIN 18251-1: it is essential to dismount the gear box first. Metal filings could be attracted by the magnets of the latch, which could interfere with the functioning of ...