Protech Systems PA-6322 Operation & User’s Manual

PA-6322 SERIES USER MANUAL Page: 1-10 1.4 Safety Precautions Before using this system, read the following information carefully to protect your system from damages, and extend the life cycle of the system. 1. Check the Line Voltage • The operating voltage for the power supply should be within the range of 100V to 240V AC; otherwise t ...

Protech Systems PA-6322 PA-6322 SERIES USER MANUAL Page: 3-33 ESC { n [Name] Turns upside-down printing mode on/off. [Format] ASCII ESC { n Hex. 1B 7B n Decimal 27 123 n [Range] 0 ≤ n ≤ 255 Initial Value n = 0 [Description] Specifies or cancels upside-down printing.  Cancels upside-down printing when n = <*******0> ...

Protech Systems PA-6322 PA-6322 SERIES USER MANUAL Page: 2-45 2.7.7.3 Auto-Cutter Connector CN3: Auto-cutter Connector PIN ASSIGNMENT FUNCTION 1 NC Unused 2 Vcs Power supply of the Home position sensor 3 GND GND of the Home position sensor 4 CUTS Signal of the Home position sensor 5 2B-1 Auto-cutter motor drive signal 6 2B-2 Auto-cutter motor drive si ...

Protech Systems PA-6322 PA-6322 SERIES USER MANUAL Page: 3-83 e.) Example 3. PROGRAM MSR PART‐ NO, HID mode. If your system doesn’t have any other common control driver, click the Control Object check box. Note: To run the OPOPS MSR Tester program, the Control Object must be checked. 4. MJR243 type Key Name Type Default Value Note CapISO string 1 ...

Protech Systems PA-6322 PA-6322 SERIES USER MANUAL Page: 3-115 BIOS Setting Options Description/Purpose -SPP Mode -EPP-1.9 and SPP Mode -EPP-1.7 and SPP Mode -ECP Mode -ECP and EPP 1.9 Mode -ECP and EPP 1.7 Mode Hardware Monitor Menu Path Advanced > Hardware Monitor Figure 3-13. Hardware Monitor Screen ...

Protech Systems PA-6322 PA-6322 SERIES USER MANUAL Page: 3-64 3.2.2 VFD: MB-4103 (RS-232) 3.2.2.1 Commands List 1. VFD Registry Operation Registry Path: [HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\ServiceOPOS\LineDisplay\P rox-PMP4000] Registry Name Default Data Notes Default Value LineDisplay.PMP4000.1 - BaudRate 9600 - BitLength 8 - Parity 0 - Port COM1 - Stop 1 ...

PA-6322 SERIES USER MANUAL Page: 3-25 ESC M n [Name] Select character font. [Format] ASCII ESC M n Hex. 1B 4D n Decimal 27 77 n [Range] n = 0, 1 Initial Value n = 0 [Description] This command selects ANK character fonts using n as follows: n Function 0 Character font A selected 1 Character font B selecte ...

PA-6322 SERIES USER MANUAL Page: 3-107 Figure 3-7. F81866 Super IO Configuration Screen BIOS Setting Options Description/Purpose Serial Port 1 Configuration Sub-menu Configure the parameters of Serial Port 1 (COMA). Serial Port 2 Configuration Sub-menu Configure the parameters of Serial Port 2 (COMB). Serial Port 3 Configuration ...

PA-6322 SERIES USER MANUAL Page: 3-59 Category Type Name Mutability OPOS APG Version Printer .SO Properties specific long CapJrnEmptySensor Read only 1.0 Not Applicable Properties specific long CapJrnItalic Read only 1.0 Not Applicable Properties specific long CapJrnNearEndSensor Read only 1.0 Not Applicable Properties ...

PA-6322 SERIES USER MANUAL Page: 3-150 MEMORY MAP ASSIGNMENT 0xA0000-0xBFFFF Intel® ATOMTM Processor E3800 Series/Intel® Celeron® Processor N2920/J1900 0xA0000-0xBFFFF PCI bus 0xC0000-0xDFFFF PCI bus 0xE0000-0xFFFFF PCI bus ...

PA-6322 SERIES USER MANUAL Page: A-69 EXPLODED DIAGRAM FOR Packing Panel PC System with Packing ...