Protech Systems PA-3222 Operation & User’s Manual

PA-3222 SERIES USER MANUAL Page: 3-16 Cash Drawer Configuration The I/O port address of the cash drawer is 2E (hex) and 2F (hex). 2E (hex) is the address port. 2F (hex) is the data port. User must first assign the address of register by writing address value into address port 2E (hex), then write/read data to/from the assigne ...

Protech Systems PA-3222 PA-3222 SERIES USER MANUAL Page: 3-5 WARNING: Always disconnect the power cord when you are working with connectors and jumpers on the main board. Make sure both the system and peripheral devices are turned OFF as sudden surge of power could damage sensitive components. Make sure PA-3222 is properly grounded. CAUTION: Observe ...

PA-3222 SERIES USER MANUAL Page: 4-27 ESC T n [Name] Select print direction in page mode. [Format] ASCII ESC T n Hex. 1B 54 n Decimal 27 84 n [Range] 0 ≤ n ≤ 3, 48 ≤ n ≤ 51 Initial Value n = 0 [Description] Selects the character printing direction and starting point in page mode. n Print Direction Startin ...

Protech Systems PA-3222 PA-3222 SERIES USER MANUAL Page: 4-40 GS B n [Name] Turn white/black reverse printing mode on/off [Format] ASCII GS B n Hex. 1D 42 n Decimal 29 66 n [Range] 0 ≤ n ≤ 255 Initial Value n = 0 [Description] Specifies or cancels black and white inverted printing.  Cancels black and white inverted printing w ...

PA-3222 SERIES USER MANUAL Page: 4-11 Control Codes Hexadecimal Codes Function Standard Mode Page Mode 1B 2D Turn underline mode on/off. V V 1B 32 Select default line spacing V V 1B 33 Set line spacing V V 1B 3D Select peripheral device V V 1B 40 Initialize printer V V 1B 44 Set hor ...

Protech Systems PA-3222 PA-3222 SERIES USER MANUAL Page: 4-77 Method Status of support by the driver Notes Track2Data ○ Read Only Track2DiscretionaryData ○ Read Only Track3Data ○ Read Only TracksToRead ○ R/W TransmitSentinels ○ R/W 4.9.4.2 OPOS MSR Register The OPOS MSR Register program sets up the registry information of MSRHK reader for OPOS ...

Protech Systems PA-3222 5.5.1 North Bridge .................................................................... 5-29 5.5.1.1 North Bridge – LCD Control ......................................... 5-30 5.5.2 South Bridge .......................................................... ...

Protech Systems PA-3222 PA-3222 SERIES USER MANUAL Page: 4-57 c.) BarCode tab buttons/items: Button/Item Description Print BarCode Print the barcode. Supported barcode types: UPCA, UPCE, EAN8, EAN13, ITF, Codabar, Code39, Code93, Code128 Alignment Left, center or right Position Print barcode number (None, Above or Below) 4. MB1030 type Key Name Type Def ...

Protech Systems PA-3222 PA-3222 SERIES USER MANUAL Page: 4-30 ESC c 3 n [Name] Select paper sensor(s) to output paper-end signals. [Format] ASCII ESC c 3 n Hex. 1B 63 33 n Decimal 27 99 51 n [Range] Specification: 0 ≤ n ≤ 3 Initial Value n = 0 [Description] Selects paper out detector that outputs a paper out sign ...

Protech Systems PA-3222 PA-3222 SERIES USER MANUAL Page: 4-45 Second byte (printer information) Bit Off/On Hex Decimal Function 7 Off 00 0 Not used. Fixed to Off 6 Off 00 0 Not used. Fixed to Off 5 Off 00 0 Not used. Fixed to Off 4 Off 00 0 Not used. Fixed to Off 3 On 08 8 Not used. Fixed to Off 2 On 04 4 Not used. Fixed to Off 1 On 02 2 Not used. Fixed ...

Protech Systems PA-3222 PA-3222 SERIES USER MANUAL Page: 3-49 3.7.7.5 Terminal Assignment Connector CN5: Terminal assignment connector PIN ASSIGNMENT FUNCTION 1 FEED Feed signal 2 RESET Reset signal 3 GND GND 4 ST1 Status signal 5 ST2 Status signal 6 ST3 Status signal 7 ST4 Status signal 8 GND GND 9 DRS Drawer sensor signal 10 DSW Drawer switch sign ...