Protech Systems SA-5700 Operation & User’s Manual

SA-5700 SERIES USER MANUAL Page: 5-11 BIOS Setting Options Description/Purpose Intel Virtualization Technology - Disabled - Enabled When enabled, VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. Previously codenamed "Vanderpool", VT-x represents Intel’s technology for virtualization on the x86 pla ...

Protech Systems SA-5700 SA-5700 SERIES USER MANUAL Page: 3-2 3.2 JUMPER & CONNECTOR QUICK REFERENCE TABLE JUMPER Description NAME Clear CMOS Data Selection JCMOS1 COM1 Pin9 RI/5V/12V Selection JP_COM1 COM2 Pin9 RI/5V/12V Selection JP_COM2 COM4 Pin9 RI/5V/12V Selection JP_COM4 LAN2 Port Enable Selection JP_LAN2 VCCIO Voltage Selection JP1 AT / ATX Mo ...

Protech Systems SA-5700 SA-5700 SERIES USER MANUAL Page: 4-3 Filename (Assume that DVD- ROM drive is D :) Purpose OS DOS Win7 Win8.1 Win10 Chip\Win8.1(64-bit) Software installer D:\H110\Driver\Platform\ Graphic\Win8.1(64-bit) Intel(R) HD Graphics installer X    D:\H110\Driver\Platform\LAN\ Win8.1(64-bit) Intel(R) Network Connections Software X ...

Protech Systems SA-5700 SA-5700 SERIES USER MANUAL Page: 2-3 2.2 System Overview Unit: mm 2.2.1 Front View 2.2.2 Rear View 2.2.3 Top View ...

SA-5700 SERIES USER MANUAL Page: 5-43 BIOS Setting Options Description/Purpose Storage - Do not launch - UEFI - Legacy Controls the execution of UEFI and Legacy Storage OpROM. Video - Do not launch - UEFI - Legacy Controls the execution of UEFI and Legacy Video OpROM. Other PCI devices - Do not launch - UEFI - Legacy Determines OpROM exe ...

SA-5700 SERIES USER MANUAL Page: B-25 Configuring WatchDog Timer The I/O port address of the watchdog timer is 2E (hex) and 2F (hex). 2E (hex) is the address port. 2F (hex) is the data port. User must first assign the address of register by writing address value into address port 2E (hex), then write/read data to/from the assigne ...

Protech Systems SA-5700 SA-5700 SERIES USER MANUAL Page: B-26 Code example for watch dog timer Enable watchdog timer and set timeout interval to 30 seconds. ; ------------------------- Enter to extended function mode ------------------------------- mov dx, 2eh mov al, 87h out dx, al out dx, al ; ----------------------- Select Logical Device 7 of watchdo ...

Protech Systems SA-5700 SA-5700 SERIES USER MANUAL Page: 3-36 3.5.28 BIOS Recovery Mode Selection Jumper Location: JP5 Description: BIOS Recovery Mode Selection SELECTION JUMPER SETTING JUMPER ILLUSTRATION Normal 1-2 (Default Setting) JP5 Configure 2-3 JP5 Recovery Open JP5 ...

Protech Systems SA-5700 SA-5700 SERIES USER MANUAL Page: 5-19 Menu Path Advanced > F81866 Super IO Configuration > Serial Port 4 Configuration Serial Port 4 Configuration Screen BIOS Setting Options Description/Purpose Use This Device - Disabled - Enabled Enables or Disables Serial Port 4. Device Settings No changeable options Displays the current settings of S ...

Protech Systems SA-5700 SA-5700 SERIES USER MANUAL Page: 3-22 3.5.11 HD Audio Connector Connector Location: AUDIO1 Description: HD Audio Connector for Line_in/Line_out/Mic_in. Line-in: PIN ASSIGNMENT 42 NC 43 NC 44 NC 32 HD_LINE-IN-L 33 GND 34 GND 35 HD_LINE-IN-R Line-out: PIN ASSIGNMENT 22 LINE-OUT-L 23 GND 24 GND 25 LINE-OUT-R Mic-in: PIN ASSIGNME ...

Protech Systems SA-5700 SA-5700 SERIES USER MANUAL Page: 5-37 Menu Path Chipset > PCH-IO Configuration > PCI Express Configuration > Mini PCI Express Port Configuration Mini PCI Express Port Configuration Screen BIOS Setting Options Description/Purpose Mini PCI Express Port - Disabled - Enabled Controls the PCI Express Root Port. ASPM - Disabled - L0s - L1 - L0 ...

Protech Systems SA-5700 SA-5700 SERIES USER MANUAL Page: 2-4 2.2.4 Bottom View 2.2.5 Side View 2.2.6 Quarter View ...